Skip navigation

putin IS MURDERER

Please use this identifier to cite or link to this item: https://oldena.lpnu.ua/handle/ntb/55788
Title: Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin
Other Titles: Литі емульсійні мінеральні суміші на основі бітумів, модифікованих феноло-крезолоформальдегідною смолою
Authors: Demchuk, Yuriy
Gunka, Volodymyr
Pyshyev, Serhiy
Sidun, Iurii
Hrynchuk, Yurii
Kucinska-Lipka, Justyna
Bratychak, Michael
Affiliation: Lviv Polytechnic National University
Gdansk University of Technology
Bibliographic description (Ukraine): Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin / Yuriy Demchuk, Volodymyr Gunka, Serhiy Pyshyev, Iurii Sidun, Yurii Hrynchuk, Justyna Kucinska-Lipka, Michael Bratychak // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2020. — Vol 14. — No 2. — P. 251–256.
Bibliographic description (International): Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin / Yuriy Demchuk, Volodymyr Gunka, Serhiy Pyshyev, Iurii Sidun, Yurii Hrynchuk, Justyna Kucinska-Lipka, Michael Bratychak // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2020. — Vol 14. — No 2. — P. 251–256.
Is part of: Chemistry & Chemical Technology, 2 (14), 2020
Issue: 2
Volume: 14
Issue Date: 24-Jan-2020
Publisher: Видавництво Львівської політехніки
Lviv Politechnic Publishing House
Place of the edition/event: Львів
Lviv
DOI: doi.org/10.23939/chcht14.02.251
Keywords: бітумні емульсії
емульгатор
литі емульсійні мінеральні суміші
тонкошарове покриття
модифікований бітум
адгезія
феноло-крезоло-формальдегідна смола
bitumen emulsion
emulsifier
slurry surfacing mixes
thin-layer coating
modified bitumen
adhesion
phenol-cresol-formaldehyde resin
Number of pages: 6
Page range: 251-256
Start page: 251
End page: 256
Abstract: З бітумів, модифікованих феноло-крезолоформальдегідною смолою (ФіКС-Ф), виготовлені дорожні повільнорозкладні монофазні катіонні бітумні емульсії для застосування як зв’язучого для тонкошарових покриттів з литих емульсійних мінеральних сумішей (ЛЕМС). Встановлені та проаналізовані фізико-технічні показники модифікованих і немодифікованих емульсій. Підібрані оптимальні склади ЛЕМС за критерієм розкладу на основі виготовлених бітумних емульсій. Встановлені показники вологого абразивного зношування ЛЕМС та встановлено, що додавання ФіКС-Ф покращує адгезійні властивості тонкошарового покриття.
Slow-breaking monophase cationic bitumen emulsions have been produced on the basis of bitumen modified with phenol-cresol-formaldehyde resin (PhCR-F). Bitumen emulsions were used as a binder for thin-layer coatings with slurry surfacing mixes (SSM). Physical and technical parameters of modified and unmodified emulsions were determined and analyzed. The optimal compositions of SSM were selected according to the breaking criterion. The values of SSM wet track abrasion were determined. It was found that the addition of PhCR-F allows to improve the adhesion properties of the thin-layer coatings.
URI: https://ena.lpnu.ua/handle/ntb/55788
Copyright owner: © Національний університет “Львівська політехніка”, 2020
© Demchuk Y., Gunka V., Pyshyev S, Sidun Iu., Hrynchuk Y., Kucinska-Lipka J., Bratychak M., 2020
URL for reference material: https://doi.org/10.21809/rilemtechlett.2016.23
https://doi.org/10.1016/j.conbuildmat.2012.06.032
https://doi.org/10.1016/j.conbuildmat.2014.07.081
https://doi.org/10.1080/14680629.2015.1030910
https://doi.org/10.1680/tran.2009.162.1.47
http://doi.prz.edu.pl/pl/pdf/biis/1063
https://doi.org/10.23939/chcht09.03.359
https://doi.org/10.23939/chcht13.04.489
https://doi.org/10.1007/978-3-030-27011-7_53
https://doi.org/10.23939/chcht12.04.456
https://doi.org/10.23939/chcht13.02.212
https://doi.org/10.31081/1681-309X-2019-0-4-27-33
http://online.budstandart.com/ua/catalog/doc-page?id_doc=6392
http://online.budstandart.com/ua/catalog/docpage.html?id_doc=4917
http://online.budstandart.com/ua/catalog/docpage.html?id_doc=60842
http://online.budstandart.com/ua/catalog/docpage?id_doc=54091
References (Ukraine): [1] Fang X., Garcia-Hernandez A., Lura P.: RILEM Techn. Lett., 2016, 10, 116. https://doi.org/10.21809/rilemtechlett.2016.23
[2] Al Nageim H., Al-Busaltan S., Atherton W. et al.: Construct. Build. Mater., 2012, 36, 743. https://doi.org/10.1016/j.conbuildmat.2012.06.032
[3] Al-Hdabi A., Al Nageim H., Seton L.: Construct. Build. Mater., 2014, 69, 362. https://doi.org/10.1016/j.conbuildmat.2014.07.081
[4] Boucard L., Schmitt V., Farcas F. et al.: Road Mater. Pavement Design, 2015, 16, 330. https://doi.org/10.1080/14680629.2015.1030910
[5] Thanaya I., Zoorob S., Forth J.: Proc. Inst. Civil Eng. Transport, 2009, 162, 47. https://doi.org/10.1680/tran.2009.162.1.47
[6] Sidun Iu., Solodkyy S., Vollis O.: J. Civil Eng., Environ., Architect., 2018, XXXV, 83. http://doi.prz.edu.pl/pl/pdf/biis/1063
[7] Pyshyev S., Grytsenko Y., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
[8] Sidun Iu., Solodkyy S., Shved M, et al.: Chem. Chem. Technol., 2019, 13, 489. https://doi.org/10.23939/chcht13.04.489
[9] Sidun Iu., Vollis O., Solodkyy S. et al.: [in:] Blikharskyy Z., Koszelnik P., Mesaros P. (Eds.), Lecture Notes in Civil Engineering. CEE 2019: Proceedings of CEE 2019. Springer 2019, 47, 420. https://doi.org/10.1007/978-3-030-27011-7_53
[10] Demchuk Y., Sidun Iu., Gunka V. et al.: Chem. Chem. Technol., 2018, 12, 456. https://doi.org/10.23939/chcht12.04.456
[11] Pyshyev S., Demchuk Yu., Gunka V. et al.: Chem. Chem. Technol., 2019, 13, 212. https://doi.org/10.23939/chcht13.02.212
[12] Gunka V., Demchuk Yu., Pyshyev S. et al: Pet. Coal, 2018, 60, 1199.
[13] Pyshyev S.,Demchuk Y., Gunka V.: Uglekhim. Zh., 2019, 4, 27. https://doi.org/10.31081/1681-309X-2019-0-4-27-33
[14] EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration.
[15] EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method.
[16] EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method.
[17] http://online.budstandart.com/ua/catalog/doc-page?id_doc=6392
[18] http://online.budstandart.com/ua/catalog/docpage.html?id_doc=4917
[19] EN 12593. European Standard. Bitumen and bituminous binders. Determination of the Fraas breaking point.
[20] EN 12591. European Standard. Bitumen and bituminous binders - Specifications for paving grade bitumens.
[21] ISSA A143. Recommended Performance Guideline For Micro Surfacing, 2010.
[22] ISSA Technical Bulletin 113. Test Method for Determining Mix Time for SSM Systems, 2017.
[23] ISSA Technical Bulletin 100. Laboratory Test Method for Wet Track Abrasion of SSM Systems, 2018.
[24] EN 12274-4. European Standard.Slurry surfacing. Test methods. Determination of cohesion of the mix.
[25] http://online.budstandart.com/ua/catalog/docpage.html?id_doc=60842
[26] http://online.budstandart.com/ua/catalog/docpage?id_doc=54091
References (International): [1] Fang X., Garcia-Hernandez A., Lura P., RILEM Techn. Lett., 2016, 10, 116. https://doi.org/10.21809/rilemtechlett.2016.23
[2] Al Nageim H., Al-Busaltan S., Atherton W. et al., Construct. Build. Mater., 2012, 36, 743. https://doi.org/10.1016/j.conbuildmat.2012.06.032
[3] Al-Hdabi A., Al Nageim H., Seton L., Construct. Build. Mater., 2014, 69, 362. https://doi.org/10.1016/j.conbuildmat.2014.07.081
[4] Boucard L., Schmitt V., Farcas F. et al., Road Mater. Pavement Design, 2015, 16, 330. https://doi.org/10.1080/14680629.2015.1030910
[5] Thanaya I., Zoorob S., Forth J., Proc. Inst. Civil Eng. Transport, 2009, 162, 47. https://doi.org/10.1680/tran.2009.162.1.47
[6] Sidun Iu., Solodkyy S., Vollis O., J. Civil Eng., Environ., Architect., 2018, XXXV, 83. http://doi.prz.edu.pl/pl/pdf/biis/1063
[7] Pyshyev S., Grytsenko Y., Solodkyy S. et al., Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
[8] Sidun Iu., Solodkyy S., Shved M, et al., Chem. Chem. Technol., 2019, 13, 489. https://doi.org/10.23939/chcht13.04.489
[9] Sidun Iu., Vollis O., Solodkyy S. et al., [in:] Blikharskyy Z., Koszelnik P., Mesaros P. (Eds.), Lecture Notes in Civil Engineering. CEE 2019: Proceedings of CEE 2019. Springer 2019, 47, 420. https://doi.org/10.1007/978-3-030-27011-7_53
[10] Demchuk Y., Sidun Iu., Gunka V. et al., Chem. Chem. Technol., 2018, 12, 456. https://doi.org/10.23939/chcht12.04.456
[11] Pyshyev S., Demchuk Yu., Gunka V. et al., Chem. Chem. Technol., 2019, 13, 212. https://doi.org/10.23939/chcht13.02.212
[12] Gunka V., Demchuk Yu., Pyshyev S. et al: Pet. Coal, 2018, 60, 1199.
[13] Pyshyev S.,Demchuk Y., Gunka V., Uglekhim. Zh., 2019, 4, 27. https://doi.org/10.31081/1681-309X-2019-0-4-27-33
[14] EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration.
[15] EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method.
[16] EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method.
[17] http://online.budstandart.com/ua/catalog/doc-page?id_doc=6392
[18] http://online.budstandart.com/ua/catalog/docpage.html?id_doc=4917
[19] EN 12593. European Standard. Bitumen and bituminous binders. Determination of the Fraas breaking point.
[20] EN 12591. European Standard. Bitumen and bituminous binders - Specifications for paving grade bitumens.
[21] ISSA A143. Recommended Performance Guideline For Micro Surfacing, 2010.
[22] ISSA Technical Bulletin 113. Test Method for Determining Mix Time for SSM Systems, 2017.
[23] ISSA Technical Bulletin 100. Laboratory Test Method for Wet Track Abrasion of SSM Systems, 2018.
[24] EN 12274-4. European Standard.Slurry surfacing. Test methods. Determination of cohesion of the mix.
[25] http://online.budstandart.com/ua/catalog/docpage.html?id_doc=60842
[26] http://online.budstandart.com/ua/catalog/docpage?id_doc=54091
Content type: Article
Appears in Collections:Chemistry & Chemical Technology. – 2020. – Vol. 14, No. 2

Files in This Item:
File Description SizeFormat 
2020v14n2_Demchuk_Y-Slurry_Surfacing_Mixes_251-256.pdf393.92 kBAdobe PDFView/Open
2020v14n2_Demchuk_Y-Slurry_Surfacing_Mixes_251-256__COVER.png555.12 kBimage/pngView/Open
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.