| DC Field | Value | Language |
|---|
| dc.contributor.author | Ljaskovska, Solomija | |
| dc.contributor.author | Malets, Igor | |
| dc.contributor.author | Martyn, Yevgen | |
| dc.contributor.author | Prydatko, Oleksandr | |
| dc.coverage.temporal | 21-25 August 2018, Lviv | |
| dc.date.accessioned | 2020-06-19T12:05:07Z | - |
| dc.date.available | 2020-06-19T12:05:07Z | - |
| dc.date.created | 2018-02-28 | |
| dc.date.issued | 2018-02-28 | |
| dc.identifier.citation | Information Technology of Process Modeling in the Multiparameter Systems / Solomija Ljaskovska, Igor Malets, Yevgen Martyn, Oleksandr Prydatko // Data stream mining and processing : proceedings of the IEEE second international conference, 21-25 August 2018, Lviv. — Львів : Lviv Politechnic Publishing House, 2018. — P. 177–182. — (Dynamic Data Mining & Data Stream Mining). | |
| dc.identifier.isbn | © Національний університет „Львівська політехніка“, 2018 | |
| dc.identifier.isbn | © Національний університет „Львівська політехніка“, 2018 | |
| dc.identifier.uri | https://ena.lpnu.ua/handle/ntb/52485 | - |
| dc.description.abstract | Information graphics technologies of designing
models of the processes of multiparameter technical systems
are argued and developed in order to increase the effectiveness
of determining the influence of many operating parameters on
their dynamics. The requirements for model designs are
formulated on the basis of the formed numbers of different
measurements of multidimensional spaces. Its implementation
is proposed by a complex combination of the mathematical
description of the parameters interconnection and the use of
rational geometry. The features of the implementation of
models are shown with the number of possible assumptions reduced. | |
| dc.format.extent | 177-182 | |
| dc.language.iso | en | |
| dc.publisher | Lviv Politechnic Publishing House | |
| dc.relation.ispartof | Data stream mining and processing : proceedings of the IEEE second international conference, 2018 | |
| dc.relation.uri | Http://www.spectrum-soft.com/down/ug111.pdf | |
| dc.relation.uri | http://www.optimizationonline.org/DB_FILE/2016/03/5348.pdf | |
| dc.subject | information technology | |
| dc.subject | modeling | |
| dc.subject | multiparameter system | |
| dc.subject | processes | |
| dc.subject | applied geometry | |
| dc.title | Information Technology of Process Modeling in the Multiparameter Systems | |
| dc.type | Conference Abstract | |
| dc.rights.holder | © Національний університет “Львівська політехніка”, 2018 | |
| dc.contributor.affiliation | Lviv Polytechnic National University | |
| dc.contributor.affiliation | Lviv State University of Life Safety | |
| dc.format.pages | 6 | |
| dc.identifier.citationen | Information Technology of Process Modeling in the Multiparameter Systems / Solomija Ljaskovska, Igor Malets, Yevgen Martyn, Oleksandr Prydatko // Data stream mining and processing : proceedings of the IEEE second international conference, 21-25 August 2018, Lviv. — Lviv Politechnic Publishing House, 2018. — P. 177–182. — (Dynamic Data Mining & Data Stream Mining). | |
| dc.relation.references | [1] S. Briot, and W. Khalil, Dinamics of Parallel Robots: From Riging Bodies to Fleexible Elements. Springer International Publishing Switzerland, 2015. | |
| dc.relation.references | [2] Yj. Zhao, “Dynamic optimum dasign of a three translational degres of freedom parallel robot white considering anisotropic property,” Robotics and Computer-Integrated Manufacturing, vol. 29(4), pp. 100-102, 2013. | |
| dc.relation.references | [3] O. Prydatko, and I. Pasnak, “Investigation of the processes of the information technologies integration into the training of specialists at mine rescue departments,” Scientific bulletin of National Mining University, is. 1 (157), pp. 108-113, 2017. | |
| dc.relation.references | [4] P. Chmiel, Y..Martyn, J. Olenjuk and Ya.. Pidgorodecky ‘’Metody representacji modeli w zarzadzaniu zorientowanym projektowo transgranicznych jednostek operacyino – ratowniczych,’’ Technika, Informatyka, Inzynieria bezpieczenstwa.- Czestochowa, pp. 31–48, 2014. | |
| dc.relation.references | [5] V. Lobov, K. Lobova, and Ye. Fortuna, ‘‘Comparison of mechanical properties of asynchronous elecnric motors at various schemes of paravetric control,’’ Scientific bulletin of National Mining University, is. 1 (157), pp. 88-92, 2017. | |
| dc.relation.references | [6] D. Pilchicovs, and E. Dzelzitis, “Evaluation of Efficiency Improvement Potential Applying Proportoinal Presure Control of Variable Speed Pumps in Water Suplly,” International Jornal of Engineering Science Invention, vol. 2, is. 9, pp. 29-38, 2013. ISSN (Online): 2319-6734, ISN (Print): 2319-6726. | |
| dc.relation.references | [7] O. Gumen, N. Spodyniuk, M. Ulewicz, and Y. V.Martyn, ‘‘Research of thermal processes in industrial premises with Energy - saving technologies of heating,’’ Diagnostics: Collection of scientific works, Poland: Polish Society for Technical Diagnostics, no.18(2), pp. 43-49, 2017. | |
| dc.relation.references | [8] В. Arnold, Teoria katastrof. М.: Nauka, 1990. | |
| dc.relation.references | [9] Anton I. Guda, and A. I. Mikhalyov, “Criteria synthesis problem for the chaotic systems identification,” IEEE 1st International Conference on Data Stream Mining and Processing (DSMP 2016), Lviv, Ukraine, pp. 125—128, 2016. | |
| dc.relation.references | [10] S.M. Kovalʹov, M.S. Humen, Pustyulʹha S.I. at el. Prykladna heometriya ta inzhenerna hrafika. Lutsʹk: LDTU, 2006. | |
| dc.relation.references | [11] Micro-Cap 11 Electronic Circuit Analysis Program. Users Guide.© Spectrum Software. 1982-2014. Jon-line Available at: Http://www.spectrum-soft.com/down/ug111.pdf | |
| dc.relation.references | [12] P. Kolpahchyan and Alexander Zarifyan Jr., “Study of the asynchronous traction drivers operating modes by computer simulation. Part 2. Simulation results and analysis,” Transport problems, vol. 10, is. 3, pp. 5-15, 2015. | |
| dc.relation.references | [13] L. House-Peters, and Heejum Chang, “Urban water demand modeling: Rewiew of concept, methods and organizing principles,” Water resource research, vol. 47, pp. 1-15. 2011. | |
| dc.relation.references | [14] K. Frank J. General Ellipse Packing in Optimized Regular Polygons, (Submitted for Publication February 2016) / Frank J. Kampas, Ignacio Castillo, Janos D. Pinter // Global Optimization Submissions. – 2016.(http://www.optimizationonline.org/DB_FILE/2016/03/5348.pdf). | |
| dc.relation.references | [15] J. Kalrath, and S. Rebennack “Cutting ellipses from area-minimizing rectangles,” Journal of Global Optimization, vol. 59 (2-3), pp.405-437, 2014. | |
| dc.relation.references | [16] W. X. Xu, H. S. Chen, and Z. Lv, “An overlapping detection algorithm for random sequential packing of elliptical particles,” Physica, vol. 390, pp. 2425-2467, 2011. doi:10.1016/j.physa.2011.02.048. | |
| dc.relation.references | [17] S. Kramer, R. Gritzki, A. Perschk, M. Roesler, and C. Felsmann, “Numerical simulation of radiative heat transfer in indoor environments on programmable graphics hardware,” International Journal of Thermal Sciences, vol. 96, pp. 345-354, 2015. | |
| dc.relation.references | [18] E.-H. Lee, D.-Y. Yang,: “Experimental and numerical analysis of a parabolic reflector with a radiant heat source.” International Journal of Heat and Mass Transfer. Vol. 85, pp. 860-864, 2015. | |
| dc.relation.referencesen | [1] S. Briot, and W. Khalil, Dinamics of Parallel Robots: From Riging Bodies to Fleexible Elements. Springer International Publishing Switzerland, 2015. | |
| dc.relation.referencesen | [2] Yj. Zhao, "Dynamic optimum dasign of a three translational degres of freedom parallel robot white considering anisotropic property," Robotics and Computer-Integrated Manufacturing, vol. 29(4), pp. 100-102, 2013. | |
| dc.relation.referencesen | [3] O. Prydatko, and I. Pasnak, "Investigation of the processes of the information technologies integration into the training of specialists at mine rescue departments," Scientific bulletin of National Mining University, is. 1 (157), pp. 108-113, 2017. | |
| dc.relation.referencesen | [4] P. Chmiel, Y..Martyn, J. Olenjuk and Ya.. Pidgorodecky ‘’Metody representacji modeli w zarzadzaniu zorientowanym projektowo transgranicznych jednostek operacyino – ratowniczych,’’ Technika, Informatyka, Inzynieria bezpieczenstwa, Czestochowa, pp. 31–48, 2014. | |
| dc.relation.referencesen | [5] V. Lobov, K. Lobova, and Ye. Fortuna, ‘‘Comparison of mechanical properties of asynchronous elecnric motors at various schemes of paravetric control,’’ Scientific bulletin of National Mining University, is. 1 (157), pp. 88-92, 2017. | |
| dc.relation.referencesen | [6] D. Pilchicovs, and E. Dzelzitis, "Evaluation of Efficiency Improvement Potential Applying Proportoinal Presure Control of Variable Speed Pumps in Water Suplly," International Jornal of Engineering Science Invention, vol. 2, is. 9, pp. 29-38, 2013. ISSN (Online): 2319-6734, ISN (Print): 2319-6726. | |
| dc.relation.referencesen | [7] O. Gumen, N. Spodyniuk, M. Ulewicz, and Y. V.Martyn, ‘‘Research of thermal processes in industrial premises with Energy - saving technologies of heating,’’ Diagnostics: Collection of scientific works, Poland: Polish Society for Technical Diagnostics, no.18(2), pp. 43-49, 2017. | |
| dc.relation.referencesen | [8] V. Arnold, Teoria katastrof. M., Nauka, 1990. | |
| dc.relation.referencesen | [9] Anton I. Guda, and A. I. Mikhalyov, "Criteria synthesis problem for the chaotic systems identification," IEEE 1st International Conference on Data Stream Mining and Processing (DSMP 2016), Lviv, Ukraine, pp. 125-128, 2016. | |
| dc.relation.referencesen | [10] S.M. Kovalʹov, M.S. Humen, Pustyulʹha S.I. at el. Prykladna heometriya ta inzhenerna hrafika. Lutsʹk: LDTU, 2006. | |
| dc.relation.referencesen | [11] Micro-Cap 11 Electronic Circuit Analysis Program. Users Guide.© Spectrum Software. 1982-2014. Jon-line Available at: Http://www.spectrum-soft.com/down/ug111.pdf | |
| dc.relation.referencesen | [12] P. Kolpahchyan and Alexander Zarifyan Jr., "Study of the asynchronous traction drivers operating modes by computer simulation. Part 2. Simulation results and analysis," Transport problems, vol. 10, is. 3, pp. 5-15, 2015. | |
| dc.relation.referencesen | [13] L. House-Peters, and Heejum Chang, "Urban water demand modeling: Rewiew of concept, methods and organizing principles," Water resource research, vol. 47, pp. 1-15. 2011. | |
| dc.relation.referencesen | [14] K. Frank J. General Ellipse Packing in Optimized Regular Polygons, (Submitted for Publication February 2016), Frank J. Kampas, Ignacio Castillo, Janos D. Pinter, Global Optimization Submissions, 2016.(http://www.optimizationonline.org/DB_FILE/2016/03/5348.pdf). | |
| dc.relation.referencesen | [15] J. Kalrath, and S. Rebennack "Cutting ellipses from area-minimizing rectangles," Journal of Global Optimization, vol. 59 (2-3), pp.405-437, 2014. | |
| dc.relation.referencesen | [16] W. X. Xu, H. S. Chen, and Z. Lv, "An overlapping detection algorithm for random sequential packing of elliptical particles," Physica, vol. 390, pp. 2425-2467, 2011. doi:10.1016/j.physa.2011.02.048. | |
| dc.relation.referencesen | [17] S. Kramer, R. Gritzki, A. Perschk, M. Roesler, and C. Felsmann, "Numerical simulation of radiative heat transfer in indoor environments on programmable graphics hardware," International Journal of Thermal Sciences, vol. 96, pp. 345-354, 2015. | |
| dc.relation.referencesen | [18] E.-H. Lee, D.-Y. Yang,: "Experimental and numerical analysis of a parabolic reflector with a radiant heat source." International Journal of Heat and Mass Transfer. Vol. 85, pp. 860-864, 2015. | |
| dc.citation.conference | IEEE second international conference "Data stream mining and processing" | |
| dc.citation.spage | 177 | |
| dc.citation.epage | 182 | |
| dc.coverage.placename | Львів | |
| Appears in Collections: | Data stream mining and processing : proceedings of the IEEE second international conference
|
