https://oldena.lpnu.ua/handle/ntb/45208| Title: | Dielectric behavior of SBS/polyaniline thermally processable blends |
| Other Titles: | Діелектрична поведінка термообробленої суміші СБС/поліанілін |
| Authors: | Fernando, G. Souza, Jr. Soares, Bluma G. Silveira, Fabiola Renukappa, N. M. Siddaramaiah |
| Affiliation: | Universidade Federal do Rio de Janeiro, Cidade Universitária, Rio de Janeiro, Brasil Sri Jayachamarajendra College of Engineering, Mysore, India |
| Bibliographic description (Ukraine): | Dielectric behavior of SBS/polyaniline thermally processable blends / Fernando G., Souza Jr., Bluma G. Soares, Fabiola Silveira, N. M. Renukappa, Siddaramaiah // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 441–446. |
| Bibliographic description (International): | Dielectric behavior of SBS/polyaniline thermally processable blends / Fernando G., Souza Jr., Bluma G. Soares, Fabiola Silveira, N. M. Renukappa, Siddaramaiah // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 441–446. |
| Is part of: | Chemistry & Chemical Technology, 4 (12), 2018 |
| Journal/Collection: | Chemistry & Chemical Technology |
| Issue: | 4 |
| Volume: | 12 |
| Issue Date: | 20-Jan-2018 |
| Publisher: | Lviv Politechnic Publishing House |
| Place of the edition/event: | Lviv |
| Keywords: | СБС поліанілін суміш розплавів діелектрична поведінка SBS polyaniline melt blending dielectric behavior |
| Number of pages: | 6 |
| Page range: | 441-446 |
| Start page: | 441 |
| End page: | 446 |
| Abstract: | Одержано триблок-кополімерні суміші сти-
рен-бутадієн-стирену (СБС) з різними концентраціями поліані-
ліну (ПАН). Визначено вплив таких параметрів, як концент-
рація ПАН, частота та температура на електричні влас-
тивості: густину, діелектричну проникність, тангенс кута
втрат та провідність змінного струму. Показано, що незначне
зменшення об'ємного питомого опору як функції температури,
є корисним за умов утрудненого контролю температури.
Встановлено, що зразок із 45% мас. ПАН потенційно може
бути використаний у полі електромагнітного випромінювання.
Доведено, що електрична провідність суміші переважає йонне
транспортування. Одержані матеріали можна викорис-
товувати як стратегічний, недорогий, екологічно чистий
матеріал у різних суміжних сферах. 1Styrene–butadiene–styrene triblock copolymer (SBS) blends were prepared using different weight ratios of conducting polyaniline (PANI). Several electrical properties such as volume resistivity, dielectric constant, dissipation factor and alternating current conductivity of the blends were studied pointing to understand the influence of different parameters like PANI concentration, frequency, and temperature on these properties. The prepared materials present a slight reduction in volume resistivity as a function of temperature, being useful in conditions where the temperature control is hard. More than this, dielectric constant tests allowed inferring that among tested samples, the one filled with 45 wt % of PANI is potentially able to be used in the electromagnetic dissipation field. Finally, the alternating current tests allowed to prove that the electrical conduction of the blend is mainly dominated by ionic transportation. Therefore, prepared materials can be considered as a strategic, low-cost, environmentally friendly material which can be used in various border fields. |
| URI: | https://ena.lpnu.ua/handle/ntb/45208 |
| Copyright owner: | © Національний університет „Львівська політехніка“, 2018 ©Souza Jr. F., Soares B., Silveira F., Renukappa N., Siddaramaiah,2018 |
| URL for reference material: | https://doi.org/10.23939/chcht10.01.041 https://doi.org/10.23939/chcht10.04.429 https://doi.org/10.23939/chcht09.02.143 https://doi.org/10.1016/j.indcrop.2014.09.032 https://doi.org/10.1016/j.polymer.2006.01.033 https://doi.org/10.1016/j.msea.2007.05.099 https://doi.org/10.1002/adma.201402625 https://doi.org/10.1080/00405167.2016.1201934 https://doi.org/10.1016/j.eurpolymj.2007.02.037 https://doi.org/10.1016/j.polymer.2016.01.054 https://doi.org/10.1166/jbmb.2014.1478 https://doi.org/10.1002/polb.21305 https://doi.org/10.1016/j.jiec.2017.03.036 https://doi.org/10.1016/j.orgel.2017.07.043 https://doi.org/10.1016/j.synthmet.2016.12.029 https://doi.org/10.1016/j.compscitech.2017.08.010 https://doi.org/10.1016/j.polymertesting.2005.08.001 https://doi.org/10.1016/j.addr.2016.01.003 https://doi.org/10.1016/j.addr.2016.04.003 https://doi.org/10.1080/03602559.2015.1070874 https://doi.org/10.1504/IJMATEI.2015.072207 https://doi.org/10.1039/C5PY00686D https://doi.org/10.1016/j.carbpol.2016.10.036 https://doi.org/10.1016/j.conbuildmat.2014.11.043 https://doi.org/10.1021/acsami.5b05041 https://doi.org/10.1039/C5PY00459D https://doi.org/10.1039/C6EE02770A https://doi.org/10.1007/s11581-017-2155-1 https://doi.org/10.1021/acs.chemmater.7b00474 https://doi.org/10.1007/s10853-017-0897-9 https://doi.org/10.1016/j.polymer.2017.01.082 https://doi.org/10.1039/C6RA26155H https://doi.org/10.1016/j.polymer.2017.01.007 https://doi.org/10.1002/pen.24499 https://doi.org/10.1007/s10853-017-1251-y https://doi.org/10.1016/j.compscitech.2016.12.007 https://doi.org/10.1016/j.reactfunctpolym.2017.03.009 https://doi.org/10.1016/j.polymertesting.2007.03.004 https://doi.org/10.1016/j.polymer.2006.08.026 https://doi.org/10.1016/j.polymertesting.2006.01.014 https://doi.org/10.1002/mame.200500406 https://doi.org/10.1002/app.24280 https://doi.org/10.1119/1.1794757 https://doi.org/10.1002/mame.200900111 https://doi.org/10.1119/1.4975385 https://doi.org/10.1109/TDEI.2017.005956 https://doi.org/10.1080/00405000.2017.1330174 https://doi.org/10.1016/j.apenergy.2014.09.081 https://doi.org/10.1007/s11581-015-1565-1 https://doi.org/10.1109/TEMC.2016.2639060 https://doi.org/10.2528/PIERL13022207 https://doi.org/10.12783/dtcse/iceiti2016/6153 https://doi.org/10.1016/j.cap.2008.03.009 https://doi.org/10.1063/1.4919877 https://doi.org/10.1002/adma.201305293 https://doi.org/10.1016/j.elstat.2013.11.012 https://doi.org/10.1016/j.reactfunctpolym.2008.08.009 https://doi.org/10.4028/www.scientific.net/MSF.825-826.944 https://doi.org/10.1016/j.conbuildmat.2015.12.075 https://doi.org/10.1007/s00289-015-1477-2 |
| References (Ukraine): | [1]Melad O., Jarur M.: Chem. Chem. Technol., 2016, 10, 41.https://doi.org/10.23939/chcht10.01.041 [2] Yatsyshyn M., Makogon V., Reshetnyak O. et al.: Chem. Chem. Technol., 2016, 10, 429. https://doi.org/10.23939/chcht10.04.429 [3] Thorat S., Kulkarni M., Thorat G.: Chem. Chem. Technol.,2015, 9, 143. https://doi.org/10.23939/chcht09.02.143 [4] Souza Jr F., da Silva A., de Oliveira G. et al.: Ind. Crops Prod.,2015, 68, 97. https://doi.org/10.1016/j.indcrop.2014.09.032 [5] Souza Jr F., Soares B., Mantovani G. et al.: Polymer, 2006, 47,2163. https://doi.org/10.1016/j.polymer.2006.01.033 [6] Souza Jr F., Soares B., Siddaramaiah et al.:Mater. Sci. Eng. A,2008, 476, 240. https://doi.org/10.1016/j.msea.2007.05.099 [7] Liao C., ZhangM., YaoM. et al.: AdvMater., 2015, 27, 7493.https://doi.org/10.1002/adma.201402625 [8]Mokhtari F., Salehi M., Zamani F. et al.: Text. Prog., 2016, 48,119. https://doi.org/10.1080/00405167.2016.1201934 [9] Souza Jr F., Pinto J., Soares B.: Eur. Polym. J., 2007, 43, 2007.https://doi.org/10.1016/j.eurpolymj.2007.02.037 [10] Kumar V., Yokozeki T., Goto T., Takahashi T.: Polymer, 2016,86, 129. https://doi.org/10.1016/j.polymer.2016.01.054 [11] Ferreira S., da Silva A., Souza Jr. F. et al.: J. BiobasedMater. Bioenerg., 2014, 8, 578. https://doi.org/10.1166/jbmb.2014.1478 [12] Souza Jr F., Soares B., Dahmouche K.: J. Polym. Sci. B, 2007,45, 3069. https://doi.org/10.1002/polb.21305 [13] Khatoon H., Ahmad S.: J. Ind. Eng. Chem., 2017, 53, 1.https://doi.org/10.1016/j.jiec.2017.03.036 [14]Malti A., Tu D., Edberg J. et al.: Org. Electron., 2017, 50, 304.https://doi.org/10.1016/j.orgel.2017.07.043 [15] Stejskal J., Bober P., TrchováM. et al.: SyntheticMet., 2017,224, 109. https://doi.org/10.1016/j.synthmet.2016.12.029 [16]Mehra N., Mu L., Ji T. et al.: Compos. Sci. Technol., 2017,151, 115. https://doi.org/10.1016/j.compscitech.2017.08.010 [17] Souza Jr F., Michel R., Soares B.: Polym. Test., 2005, 24, 998.https://doi.org/10.1016/j.polymertesting.2005.08.001 [18] Qi S., Craig D.: Adv. Drug. Deliv. Rev., 2016, 100, 67.https://doi.org/10.1016/j.addr.2016.01.003 [19]MurariuM., Dubois P.: Adv. Drug. Deliv. Rev., 2016, 107, 17.https://doi.org/10.1016/j.addr.2016.04.003 [20] Rafique I., Kausar A., Anwar Z., Muhammad B.: Polym. Plast. Technol. Eng., 2016, 55, 312.https://doi.org/10.1080/03602559.2015.1070874 [21] Aïssa B., HabibM., Abdul-Hafidh E. et al.: Int. J. Mater. Eng. Innovat., 2015, 6, 185.https://doi.org/10.1504/IJMATEI.2015.072207 [22] Sousa A., Vilela C., Fonseca A. et al.: Polym. Chem., 2015, 6,5961. https://doi.org/10.1039/C5PY00686D [23] Drakopoulos S., Karger-Kocsis J., Kmetty Á. et al.: Carbohydr. Polym., 2017, 157, 711.https://doi.org/10.1016/j.carbpol.2016.10.036 [24] Saba N., ParidahM., JawaidM.: Constr. Build. Mater., 2015,76, 87. https://doi.org/10.1016/j.conbuildmat.2014.11.043 [25] Das A., Sallat A., Böhme F. et al.: ACS Appl. Mater. Interface., 2015, 7, 20623. https://doi.org/10.1021/acsami.5b05041 [26] Imbernon L., Oikonomou E., Norvez S., Leibler L.: Polym. Chem., 2015, 6, 4271. https://doi.org/10.1039/C5PY00459D [27] Yu B-C., Jung J-W., Park K., Goodenough J.: Energ. Environ. Sci., 2017, 10, 86. https://doi.org/10.1039/C6EE02770A [28] HamsanM., Shukur M., Kadir M.: Ionics, 2017, 23; 3429. https://doi.org/10.1007/s11581-017-2155-1 [29] Zeglio E., Schmidt M., Thelakkat M. et al.: Chem. Mater.,2017, 29, 4293. https://doi.org/10.1021/acs.chemmater.7b00474 [30] Suriani A., NurhafizahM., Mohamed A. et al.: J. Mater. Sci.,2017, 52, 6611. https://doi.org/10.1007/s10853-017-0897-9 [31] George N., Bipinbal P., Bhadran B. et al.: Polymer, 2017, 112,264. https://doi.org/10.1016/j.polymer.2017.01.082 [32] Li L., Zhao P., Luo Y. et al.: RSC Adv., 2017, 7, 1093.https://doi.org/10.1039/C6RA26155H [33] Kim H., Ahn K., Lee S.: Polymer, 2017, 110, 187.https://doi.org/10.1016/j.polymer.2017.01.007 [34] García-Uriostegui L., Pineda-Torres G., López-Ramírez S. et al.: Polym. Eng. Sci., 2017, 57, 1214.https://doi.org/10.1002/pen.24499 [35] Yin Q., Wen Y., Jia H. et al.: J. Mater. Sci., 2017, 52, 10814.https://doi.org/10.1007/s10853-017-1251-y [36] Qi X., Xiu H., Wei Y. et al.: Compos. Sci. Technol., 2017, 139,8. https://doi.org/10.1016/j.compscitech.2016.12.007 [37] Perrin F., Oueiny C.: React. Funct. Polym., 2017, 114, 86.https://doi.org/10.1016/j.reactfunctpolym.2017.03.009 [38] Souza Jr F., Pinto J., de Oliveira G., Soares B.: Polym. Test.,2007, 26, 720. https://doi.org/10.1016/j.polymertesting.2007.03.004 [39] Souza Jr F., Soares B., Siddaramaiah et al.: Polymer, 2006, 47,7548. https://doi.org/10.1016/j.polymer.2006.08.026 [40] Souza Jr F., Soares B.: Polym. Test., 2006, 25, 512.https://doi.org/10.1016/j.polymertesting.2006.01.014 [41] Souza Jr F., Soares B., Pinto J.:Macromol. Mater. Eng., 2006,291, 463. https://doi.org/10.1002/mame.200500406 [42] Souza Jr F., Sirelli L., Michel R. et al.: J. Appl. Polym. Sci.,2006, 102, 535. https://doi.org/10.1002/app.24280 [43] Grove T., MastersM., Miers R.: Am. J. Phys., 2005, 73, 52.https://doi.org/10.1119/1.1794757 [44] Souza Jr F., Oliveira G., Anzai T. et al.:Macromol. Mater. Eng., 2009, 294, 739. https://doi.org/10.1002/mame.200900111 [45] Bohren C.: Am. J. Phys., 2017, 85, 165.https://doi.org/10.1119/1.4975385 [46] Xiang T., Zheng Q., Qin S.: IEEE Trans. Dielectr. Electr. Insul., 2017, 24, 1197. https://doi.org/10.1109/TDEI.2017.005956 [47]Matsouka D., Vassiliadis S., Mitilineos S. et al.: J. Text Inst.,2017, 109, 1. https://doi.org/10.1080/00405000.2017.1330174 [48] Luo X., Wang J., Dooner M., Clarke J.: Appl. Energ., 2015,137, 511. https://doi.org/10.1016/j.apenergy.2014.09.081 [49] Bhavani G., Ganesan S., Selvasekarapandian S. et al.: Ionics,2016, 22, 581. https://doi.org/10.1007/s11581-015-1565-1 [50] Baskey H., Johari E., Akhtar M.: IEEE Trans. Electromagn. Compat., 2017, 59, 1060.https://doi.org/10.1109/TEMC.2016.2639060 [51] AbdallaM.: Prog. Electromagn. Res. Lett., 2013, 39, 63.https://doi.org/10.2528/PIERL13022207 [52]Wang Y., Chen Y., Zhou Y., Fu H.: DEStech. Trans. Comput. Sci. Eng., 2016. https://doi.org/10.12783/dtcse/iceiti2016/6153 [53] Bhadra S., Singha N., Khastgir D.: Curr. Appl. Phys., 2009, 9,396. https://doi.org/10.1016/j.cap.2008.03.009 [54] Samet M., Levchenko V., Boiteux G. et al.: J. Chem. Phys.,2015, 142, 194703. https://doi.org/10.1063/1.4919877 [55] Yousefi N., Sun X., Lin X. et al.: Adv. Mater., 2014, 26, 5480.https://doi.org/10.1002/adma.201305293 [56] Rogti F., Ferhat M.: J. Electrost., 2014, 72, 91.https://doi.org/10.1016/j.elstat.2013.11.012 [57] Yu X., Yi B., Liu F., Wang X.: React. Funct. Polym., 2008, 68,1557. https://doi.org/10.1016/j.reactfunctpolym.2008.08.009 [58] Chaloupka A., Wedel A., Taha I. et al.:alysis. Mater. Sci. Forum., 2015, 825-826, 944.https://doi.org/10.4028/www.scientific.net/MSF.825-826.944 [59] SabaN., JawaidM., AlothmanO., ParidahM.:Constr. Build. Mater.,2016, 106, 149. https://doi.org/10.1016/j.conbuildmat.2015.12.075 [60] Shukla N., Thakur A., Shukla A., Marx D.: Int. J. Electrochem. Sci., 2014, 9, 7644. [61] Amin A., Ahmed E., SabaaM. et al.: Polym Bull., 2016, 73,147. https://doi.org/10.1007/s00289-015-1477-2 |
| References (International): | [1]Melad O., Jarur M., Chem. Chem. Technol., 2016, 10, 41.https://doi.org/10.23939/chcht10.01.041 [2] Yatsyshyn M., Makogon V., Reshetnyak O. et al., Chem. Chem. Technol., 2016, 10, 429. https://doi.org/10.23939/chcht10.04.429 [3] Thorat S., Kulkarni M., Thorat G., Chem. Chem. Technol.,2015, 9, 143. https://doi.org/10.23939/chcht09.02.143 [4] Souza Jr F., da Silva A., de Oliveira G. et al., Ind. Crops Prod.,2015, 68, 97. https://doi.org/10.1016/j.indcrop.2014.09.032 [5] Souza Jr F., Soares B., Mantovani G. et al., Polymer, 2006, 47,2163. https://doi.org/10.1016/j.polymer.2006.01.033 [6] Souza Jr F., Soares B., Siddaramaiah et al.:Mater. Sci. Eng. A,2008, 476, 240. https://doi.org/10.1016/j.msea.2007.05.099 [7] Liao C., ZhangM., YaoM. et al., AdvMater., 2015, 27, 7493.https://doi.org/10.1002/adma.201402625 [8]Mokhtari F., Salehi M., Zamani F. et al., Text. Prog., 2016, 48,119. https://doi.org/10.1080/00405167.2016.1201934 [9] Souza Jr F., Pinto J., Soares B., Eur. Polym. J., 2007, 43, 2007.https://doi.org/10.1016/j.eurpolymj.2007.02.037 [10] Kumar V., Yokozeki T., Goto T., Takahashi T., Polymer, 2016,86, 129. https://doi.org/10.1016/j.polymer.2016.01.054 [11] Ferreira S., da Silva A., Souza Jr. F. et al., J. BiobasedMater. Bioenerg., 2014, 8, 578. https://doi.org/10.1166/jbmb.2014.1478 [12] Souza Jr F., Soares B., Dahmouche K., J. Polym. Sci. B, 2007,45, 3069. https://doi.org/10.1002/polb.21305 [13] Khatoon H., Ahmad S., J. Ind. Eng. Chem., 2017, 53, 1.https://doi.org/10.1016/j.jiec.2017.03.036 [14]Malti A., Tu D., Edberg J. et al., Org. Electron., 2017, 50, 304.https://doi.org/10.1016/j.orgel.2017.07.043 [15] Stejskal J., Bober P., TrchováM. et al., SyntheticMet., 2017,224, 109. https://doi.org/10.1016/j.synthmet.2016.12.029 [16]Mehra N., Mu L., Ji T. et al., Compos. Sci. Technol., 2017,151, 115. https://doi.org/10.1016/j.compscitech.2017.08.010 [17] Souza Jr F., Michel R., Soares B., Polym. Test., 2005, 24, 998.https://doi.org/10.1016/j.polymertesting.2005.08.001 [18] Qi S., Craig D., Adv. Drug. Deliv. Rev., 2016, 100, 67.https://doi.org/10.1016/j.addr.2016.01.003 [19]MurariuM., Dubois P., Adv. Drug. Deliv. Rev., 2016, 107, 17.https://doi.org/10.1016/j.addr.2016.04.003 [20] Rafique I., Kausar A., Anwar Z., Muhammad B., Polym. Plast. Technol. Eng., 2016, 55, 312.https://doi.org/10.1080/03602559.2015.1070874 [21] Aïssa B., HabibM., Abdul-Hafidh E. et al., Int. J. Mater. Eng. Innovat., 2015, 6, 185.https://doi.org/10.1504/IJMATEI.2015.072207 [22] Sousa A., Vilela C., Fonseca A. et al., Polym. Chem., 2015, 6,5961. https://doi.org/10.1039/P.5PY00686D [23] Drakopoulos S., Karger-Kocsis J., Kmetty Á. et al., Carbohydr. Polym., 2017, 157, 711.https://doi.org/10.1016/j.carbpol.2016.10.036 [24] Saba N., ParidahM., JawaidM., Constr. Build. Mater., 2015,76, 87. https://doi.org/10.1016/j.conbuildmat.2014.11.043 [25] Das A., Sallat A., Böhme F. et al., ACS Appl. Mater. Interface., 2015, 7, 20623. https://doi.org/10.1021/acsami.5b05041 [26] Imbernon L., Oikonomou E., Norvez S., Leibler L., Polym. Chem., 2015, 6, 4271. https://doi.org/10.1039/P.5PY00459D [27] Yu B-C., Jung J-W., Park K., Goodenough J., Energ. Environ. Sci., 2017, 10, 86. https://doi.org/10.1039/P.6EE02770A [28] HamsanM., Shukur M., Kadir M., Ionics, 2017, 23; 3429. https://doi.org/10.1007/s11581-017-2155-1 [29] Zeglio E., Schmidt M., Thelakkat M. et al., Chem. Mater.,2017, 29, 4293. https://doi.org/10.1021/acs.chemmater.7b00474 [30] Suriani A., NurhafizahM., Mohamed A. et al., J. Mater. Sci.,2017, 52, 6611. https://doi.org/10.1007/s10853-017-0897-9 [31] George N., Bipinbal P., Bhadran B. et al., Polymer, 2017, 112,264. https://doi.org/10.1016/j.polymer.2017.01.082 [32] Li L., Zhao P., Luo Y. et al., RSC Adv., 2017, 7, 1093.https://doi.org/10.1039/P.6RA26155H [33] Kim H., Ahn K., Lee S., Polymer, 2017, 110, 187.https://doi.org/10.1016/j.polymer.2017.01.007 [34] García-Uriostegui L., Pineda-Torres G., López-Ramírez S. et al., Polym. Eng. Sci., 2017, 57, 1214.https://doi.org/10.1002/pen.24499 [35] Yin Q., Wen Y., Jia H. et al., J. Mater. Sci., 2017, 52, 10814.https://doi.org/10.1007/s10853-017-1251-y [36] Qi X., Xiu H., Wei Y. et al., Compos. Sci. Technol., 2017, 139,8. https://doi.org/10.1016/j.compscitech.2016.12.007 [37] Perrin F., Oueiny C., React. Funct. Polym., 2017, 114, 86.https://doi.org/10.1016/j.reactfunctpolym.2017.03.009 [38] Souza Jr F., Pinto J., de Oliveira G., Soares B., Polym. Test.,2007, 26, 720. https://doi.org/10.1016/j.polymertesting.2007.03.004 [39] Souza Jr F., Soares B., Siddaramaiah et al., Polymer, 2006, 47,7548. https://doi.org/10.1016/j.polymer.2006.08.026 [40] Souza Jr F., Soares B., Polym. Test., 2006, 25, 512.https://doi.org/10.1016/j.polymertesting.2006.01.014 [41] Souza Jr F., Soares B., Pinto J.:Macromol. Mater. Eng., 2006,291, 463. https://doi.org/10.1002/mame.200500406 [42] Souza Jr F., Sirelli L., Michel R. et al., J. Appl. Polym. Sci.,2006, 102, 535. https://doi.org/10.1002/app.24280 [43] Grove T., MastersM., Miers R., Am. J. Phys., 2005, 73, 52.https://doi.org/10.1119/1.1794757 [44] Souza Jr F., Oliveira G., Anzai T. et al.:Macromol. Mater. Eng., 2009, 294, 739. https://doi.org/10.1002/mame.200900111 [45] Bohren C., Am. J. Phys., 2017, 85, 165.https://doi.org/10.1119/1.4975385 [46] Xiang T., Zheng Q., Qin S., IEEE Trans. Dielectr. Electr. Insul., 2017, 24, 1197. https://doi.org/10.1109/TDEI.2017.005956 [47]Matsouka D., Vassiliadis S., Mitilineos S. et al., J. Text Inst.,2017, 109, 1. https://doi.org/10.1080/00405000.2017.1330174 [48] Luo X., Wang J., Dooner M., Clarke J., Appl. Energ., 2015,137, 511. https://doi.org/10.1016/j.apenergy.2014.09.081 [49] Bhavani G., Ganesan S., Selvasekarapandian S. et al., Ionics,2016, 22, 581. https://doi.org/10.1007/s11581-015-1565-1 [50] Baskey H., Johari E., Akhtar M., IEEE Trans. Electromagn. Compat., 2017, 59, 1060.https://doi.org/10.1109/TEMC.2016.2639060 [51] AbdallaM., Prog. Electromagn. Res. Lett., 2013, 39, 63.https://doi.org/10.2528/PIERL13022207 [52]Wang Y., Chen Y., Zhou Y., Fu H., DEStech. Trans. Comput. Sci. Eng., 2016. https://doi.org/10.12783/dtcse/iceiti2016/6153 [53] Bhadra S., Singha N., Khastgir D., Curr. Appl. Phys., 2009, 9,396. https://doi.org/10.1016/j.cap.2008.03.009 [54] Samet M., Levchenko V., Boiteux G. et al., J. Chem. Phys.,2015, 142, 194703. https://doi.org/10.1063/1.4919877 [55] Yousefi N., Sun X., Lin X. et al., Adv. Mater., 2014, 26, 5480.https://doi.org/10.1002/adma.201305293 [56] Rogti F., Ferhat M., J. Electrost., 2014, 72, 91.https://doi.org/10.1016/j.elstat.2013.11.012 [57] Yu X., Yi B., Liu F., Wang X., React. Funct. Polym., 2008, 68,1557. https://doi.org/10.1016/j.reactfunctpolym.2008.08.009 [58] Chaloupka A., Wedel A., Taha I. et al.:alysis. Mater. Sci. Forum., 2015, 825-826, 944.https://doi.org/10.4028/www.scientific.net/MSF.825-826.944 [59] SabaN., JawaidM., AlothmanO., ParidahM.:Constr. Build. Mater.,2016, 106, 149. https://doi.org/10.1016/j.conbuildmat.2015.12.075 [60] Shukla N., Thakur A., Shukla A., Marx D., Int. J. Electrochem. Sci., 2014, 9, 7644. [61] Amin A., Ahmed E., SabaaM. et al., Polym Bull., 2016, 73,147. https://doi.org/10.1007/s00289-015-1477-2 |
| Content type: | Article |
| Appears in Collections: | Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 4 |
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2018v12n4_Fernando_G-Dielectric_behavior_of_441-446.pdf | 408.99 kB | Adobe PDF | View/Open | |
| 2018v12n4_Fernando_G-Dielectric_behavior_of_441-446__COVER.png | 559.33 kB | image/png | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.