| DC Field | Value | Language |
|---|
| dc.contributor.author | Bratychak, Michael | |
| dc.contributor.author | Astakhova, Olena | |
| dc.contributor.author | Prysiazhnyi, Yuriy | |
| dc.contributor.author | Shved, Mariia | |
| dc.contributor.author | Shyshchak, Olena | |
| dc.contributor.author | Namiesnik, Jacek | |
| dc.contributor.author | Plonska-Brzezinska, Marta | |
| dc.date.accessioned | 2019-06-20T11:19:22Z | - |
| dc.date.available | 2019-06-20T11:19:22Z | - |
| dc.date.created | 2018-01-20 | |
| dc.date.issued | 2018-01-20 | |
| dc.identifier.citation | Obtaining of coumarone-indene resins based on light fraction of coal tar 3. Coumarone-indene resins with methacrylic fragments / Michael Bratychak, Olena Astakhova, Yuriy Prysiazhnyi, Mariia Shved, Olena Shyshchak, Jacek Namiesnik, Marta Plonska-Brzezinska // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 3. — P. 379–385. | |
| dc.identifier.uri | https://ena.lpnu.ua/handle/ntb/45174 | - |
| dc.description.abstract | З використанням легкої фракції кам’яно-
вугільної смоли та отриманої на її основі фракції, що википає
за температур 423-463 К, з додаванням метилметакрилатy
розроблено метод одержання інден-кумаронових смол з
метакрилатними фрагментами (CIRM). CIRM отримано за
радикальною коолігомеризацією з використанням як ініціатор
2,2’-азобіс(2-метил-пропіонітрилу). Встановлено вплив кіль-
кості ініціатора, температури та тривалості реакції на
вихід, температуру розм’якшення та молекулярну масу CIRM.
Структуру синтезованих CIRM підтверджено ІЧ– та ЯМР-
спектроскопічними дослідженнями. Запропоновано використо-
вувати CIRM як полімерну складову бітум-полімерних сумішей
(БПС). Вивчено вплив кількості CIRM, температури та
тривалості на основні характеристики БПС. | |
| dc.description.abstract | The method for obtaining coumarone-indene
resins with methacrylic fragments (CIRM) was developed
with the addition of methyl methacrylate, using a light
fraction of coal tar and its fraction boiling within 423–
463 К. CIRM was obtained via radical cooligomerization
using 2,2'-azobis (2-methyl-propionitrile) as the initiator.
The effect of the initiator amount, temperature and
reaction time on the yield, softening temperature and
molecular weight of CIRM has been established. The
structure of the synthesized CIRM has been confirmed by
IR and NMR spectroscopy. It is proposed to use CIRM as
a polymer component of bitumen-polymeric mixtures
(BPS). The effect of CIRM amount, temperature and time
on the main characteristics of BPS has been studied. | |
| dc.format.extent | 379-385 | |
| dc.language.iso | en | |
| dc.publisher | Lviv Politechnic Publishing House | |
| dc.relation.ispartof | Chemistry & Chemical Technology, 3 (12), 2018 | |
| dc.relation.uri | https://doi.org/10.1023/B:JMSC.0000012927.00747.83 | |
| dc.relation.uri | https://doi.org/10.1002/pc.20390 | |
| dc.relation.uri | https://doi.org/10.23939/chcht10.04si.631 | |
| dc.relation.uri | https://doi.org/10.23939/chcht11.01.049 | |
| dc.relation.uri | https://doi.org/10.1007/s11741-010-0651-3 | |
| dc.relation.uri | https://doi.org/10.23939/chcht11.04.509 | |
| dc.relation.uri | https://doi.org/10.23939/chcht12.01.093 | |
| dc.relation.uri | https://www.chemicalbook.com/ChemicalProductProperty_ | |
| dc.subject | інден-кумаронова смола | |
| dc.subject | кам’яно- вугільна смола | |
| dc.subject | метилметакрилат | |
| dc.subject | азоініціатор | |
| dc.subject | ІЧ-спектро- скопія | |
| dc.subject | ЯМР-спектроскопія | |
| dc.subject | бітум-полімерна суміш | |
| dc.subject | coumarone-indene resin | |
| dc.subject | coal tar | |
| dc.subject | methyl methacrylate | |
| dc.subject | azoinitiator | |
| dc.subject | IR spectroscopy | |
| dc.subject | NMR spectroscopy | |
| dc.subject | bitumen-polymeric mixture | |
| dc.title | Obtaining of coumarone-indene resins based on light fraction of coal tar 3. Coumarone-indene resins with methacrylic fragments | |
| dc.title.alternative | Одержання інден-кумаронових смол з легкої фракції кам‘яно-вугільної смоли 3. Інден-кумаронові смоли з метакрилатними фрагментами | |
| dc.type | Article | |
| dc.rights.holder | © Національний університет „Львівська політехніка“, 2018 | |
| dc.rights.holder | ©Bratychak M., Astakhova O., Prysiazhnyi Y., Shved M., Shyshchak O., Namiesnik J., Plonska-Brzezinska M., 2018 | |
| dc.contributor.affiliation | Lviv Polytechnic National University | |
| dc.contributor.affiliation | Gdansk University of Technology,Poland | |
| dc.contributor.affiliation | University of Bialystok, Poland | |
| dc.format.pages | 7 | |
| dc.identifier.citationen | Obtaining of coumarone-indene resins based on light fraction of coal tar 3. Coumarone-indene resins with methacrylic fragments / Michael Bratychak, Olena Astakhova, Yuriy Prysiazhnyi, Mariia Shved, Olena Shyshchak, Jacek Namiesnik, Marta Plonska-Brzezinska // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 3. — P. 379–385. | |
| dc.relation.references | [1]McNally T. (Ed.): PolymerModified Bitumen. Properties and Characterization. Woodhead Publ., 2011. | |
| dc.relation.references | [2] Airey G.: J. Mater. Sci., 2004, 39, 951.https://doi.org/10.1023/B:JMSC.0000012927.00747.83 | |
| dc.relation.references | [3] Fang C., Li T., Zhang Z., Jing D.: Polym. Composite., 2008, 29,500. https://doi.org/10.1002/pc.20390 | |
| dc.relation.references | [4] Pyshyev S., Gunka V., Grytsenko Y., BratychakM.: Chem. Chem. Technol., 2016, 10, 631.https://doi.org/10.23939/chcht10.04si.631 | |
| dc.relation.references | [5] Bahl J., Atheya N., Singh H. et al.: Erdoel Kohle, Erdgas, Petrochem., 1993, 46, 22. | |
| dc.relation.references | [6] BratychakM., Chervinskyy T., Astakhova O. et al.: Chem. Chem. Technol., 2010, 4, 325. | |
| dc.relation.references | [7] BratychakM., Grynyshyn O., Astakhova O. et al.: Ecolog. Chem. Eng. S, 2010, 17, 309. | |
| dc.relation.references | [8] Grynyshyn O., Astakhova O., Chervinskyy T.: Chem. Chem. Technol., 2010, 4, 241. | |
| dc.relation.references | [9] Strap G., Astakhova O., Lazorko O. et al.: Chem. Chem. Technol., 2013, 7, 279. | |
| dc.relation.references | [10] BratychakM., Iatsyshyn O., Shyshchak O. et al.: Chem. Chem. Technol., 2017, 11, 49. https://doi.org/10.23939/chcht11.01.049 | |
| dc.relation.references | [11] BratychakM., GaginM., Shyshchak O., Waclawek W.: Chemia i Inzyneria Ekologiczna, 2004, 11, 15. | |
| dc.relation.references | [12] BratychakM., GaginM., Shyshchak O., Waclawek W.: Chemia i Inzyneria Ekologiczna, 2004, 11, 21. | |
| dc.relation.references | [13] GaginM., BratychakM., Shyshchak O., Waclawek W.: Chemia i Inzyneria Ekologiczna, 2004, 11, 27. | |
| dc.relation.references | [14] Chervinskyy T., BratychakM., GaginM., Waclawek W.: Chemia i Inzyneria Ekologiczna, 2004, 11, 1225. | |
| dc.relation.references | [15] Skibitskiy V., Grynyshyn O., BratychakM., Waclawek W.: Chemia i Inzyneria Ekologiczna, 2004, 11, 41. | |
| dc.relation.references | [16] BratychakM., Grynyshyn O., Shyshchak O. et al.: Ecolog. Chem. Eng., 2007, 14, 225. | |
| dc.relation.references | [17] Grynyshyn O., BratychakM., Krynytskiy V., Donchak V.: Chem. Chem. Technol., 2008, 2, 47. | |
| dc.relation.references | [18]Wu Y., Li J., Xu J. et al.: J. Shanghai Univ. Engl. Ed., 2010,14, 313. https://doi.org/10.1007/s11741-010-0651-3 | |
| dc.relation.references | [19] Sokolov V.: Inden-Kumaronovye Smoly. Metalurgia, Moskva 1978. | |
| dc.relation.references | [20] Pyshyev S., Grytsenko Y., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. | |
| dc.relation.references | [21] BratychakM., Astakhova O., Shyshchak O. et al.: Chem. Chem. Technol., 2017, 11, 509.https://doi.org/10.23939/chcht11.04.509 | |
| dc.relation.references | [22] BratychakM., Ripak O., Namiesnik J. et al.: Chem. Chem. Technol., 2018, 12, 93. https://doi.org/10.23939/chcht12.01.093 | |
| dc.relation.references | [23] https://www.chemicalbook.com/ChemicalProductProperty_ EN_CB3415111.htm. | |
| dc.relation.references | [24] BS EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method | |
| dc.relation.references | [25] BS EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration | |
| dc.relation.references | [26] BS EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method | |
| dc.relation.references | [27] BS EN 13614:2011. European Standard. Bitumen and bituminous binders. Determination of adhesivity of ituminous emulstions by water immersion test | |
| dc.relation.referencesen | [1]McNally T. (Ed.): PolymerModified Bitumen. Properties and Characterization. Woodhead Publ., 2011. | |
| dc.relation.referencesen | [2] Airey G., J. Mater. Sci., 2004, 39, 951.https://doi.org/10.1023/B:JMSC.0000012927.00747.83 | |
| dc.relation.referencesen | [3] Fang C., Li T., Zhang Z., Jing D., Polym. Composite., 2008, 29,500. https://doi.org/10.1002/pc.20390 | |
| dc.relation.referencesen | [4] Pyshyev S., Gunka V., Grytsenko Y., BratychakM., Chem. Chem. Technol., 2016, 10, 631.https://doi.org/10.23939/chcht10.04si.631 | |
| dc.relation.referencesen | [5] Bahl J., Atheya N., Singh H. et al., Erdoel Kohle, Erdgas, Petrochem., 1993, 46, 22. | |
| dc.relation.referencesen | [6] BratychakM., Chervinskyy T., Astakhova O. et al., Chem. Chem. Technol., 2010, 4, 325. | |
| dc.relation.referencesen | [7] BratychakM., Grynyshyn O., Astakhova O. et al., Ecolog. Chem. Eng. S, 2010, 17, 309. | |
| dc.relation.referencesen | [8] Grynyshyn O., Astakhova O., Chervinskyy T., Chem. Chem. Technol., 2010, 4, 241. | |
| dc.relation.referencesen | [9] Strap G., Astakhova O., Lazorko O. et al., Chem. Chem. Technol., 2013, 7, 279. | |
| dc.relation.referencesen | [10] BratychakM., Iatsyshyn O., Shyshchak O. et al., Chem. Chem. Technol., 2017, 11, 49. https://doi.org/10.23939/chcht11.01.049 | |
| dc.relation.referencesen | [11] BratychakM., GaginM., Shyshchak O., Waclawek W., Chemia i Inzyneria Ekologiczna, 2004, 11, 15. | |
| dc.relation.referencesen | [12] BratychakM., GaginM., Shyshchak O., Waclawek W., Chemia i Inzyneria Ekologiczna, 2004, 11, 21. | |
| dc.relation.referencesen | [13] GaginM., BratychakM., Shyshchak O., Waclawek W., Chemia i Inzyneria Ekologiczna, 2004, 11, 27. | |
| dc.relation.referencesen | [14] Chervinskyy T., BratychakM., GaginM., Waclawek W., Chemia i Inzyneria Ekologiczna, 2004, 11, 1225. | |
| dc.relation.referencesen | [15] Skibitskiy V., Grynyshyn O., BratychakM., Waclawek W., Chemia i Inzyneria Ekologiczna, 2004, 11, 41. | |
| dc.relation.referencesen | [16] BratychakM., Grynyshyn O., Shyshchak O. et al., Ecolog. Chem. Eng., 2007, 14, 225. | |
| dc.relation.referencesen | [17] Grynyshyn O., BratychakM., Krynytskiy V., Donchak V., Chem. Chem. Technol., 2008, 2, 47. | |
| dc.relation.referencesen | [18]Wu Y., Li J., Xu J. et al., J. Shanghai Univ. Engl. Ed., 2010,14, 313. https://doi.org/10.1007/s11741-010-0651-3 | |
| dc.relation.referencesen | [19] Sokolov V., Inden-Kumaronovye Smoly. Metalurgia, Moskva 1978. | |
| dc.relation.referencesen | [20] Pyshyev S., Grytsenko Y., Solodkyy S. et al., Chem. Chem. Technol., 2015, 9, 359. | |
| dc.relation.referencesen | [21] BratychakM., Astakhova O., Shyshchak O. et al., Chem. Chem. Technol., 2017, 11, 509.https://doi.org/10.23939/chcht11.04.509 | |
| dc.relation.referencesen | [22] BratychakM., Ripak O., Namiesnik J. et al., Chem. Chem. Technol., 2018, 12, 93. https://doi.org/10.23939/chcht12.01.093 | |
| dc.relation.referencesen | [23] https://www.chemicalbook.com/ChemicalProductProperty_ EN_CB3415111.htm. | |
| dc.relation.referencesen | [24] BS EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method | |
| dc.relation.referencesen | [25] BS EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration | |
| dc.relation.referencesen | [26] BS EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method | |
| dc.relation.referencesen | [27] BS EN 13614:2011. European Standard. Bitumen and bituminous binders. Determination of adhesivity of ituminous emulstions by water immersion test | |
| dc.citation.journalTitle | Chemistry & Chemical Technology | |
| dc.citation.volume | 12 | |
| dc.citation.issue | 3 | |
| dc.citation.spage | 379 | |
| dc.citation.epage | 385 | |
| dc.coverage.placename | Lviv | |
| Appears in Collections: | Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 3
|
