A preliminary investigation concerning metal oxides as catalysts for esterification of lauric acid with isopropanol

Krause, Fernanda; Maruyama, Swami Area; Wypych, Fernando

Please use this identifier to cite or link to this item: https://oldena.lpnu.ua/handle/ntb/45157

Title:	A preliminary investigation concerning metal oxides as catalysts for esterification of lauric acid with isopropanol
Other Titles:	Дослідження оксидів металу, як каталізаторів естерифікації лауринової кислоти з ізопропанолом
Authors:	Krause, Fernanda Maruyama, Swami Area Wypych, Fernando
Affiliation:	Federal University of Paraná
Bibliographic description (Ukraine):	Krause F. A preliminary investigation concerning metal oxides as catalysts for esterification of lauric acid with isopropanol / Fernanda Krause, Swami Area Maruyama, Fernando Wypych // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 2. — P. 158–166.
Bibliographic description (International):	Krause F. A preliminary investigation concerning metal oxides as catalysts for esterification of lauric acid with isopropanol / Fernanda Krause, Swami Area Maruyama, Fernando Wypych // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 2. — P. 158–166.
Is part of:	Chemistry & Chemical Technology, 2 (12), 2018
Journal/Collection:	Chemistry & Chemical Technology
Issue:	2
Volume:	12
Issue Date:	20-Jan-2018
Publisher:	Lviv Politechnic Publishing House
Place of the edition/event:	Lviv
Keywords:	оксид металу ізопропілаурат есте- рифікація лауринова кислота ізопропіловий спирт metal oxide isopropyl laurate esterification lauric acid isopropanol
Number of pages:	9
Page range:	158-166
Start page:	158
End page:	166
Abstract:	Синтезовано ізопропілаурат з викорис- танням як каталізатора суміші оксидів металів. Найвищу кон- версію отримано за таких умов: 393 К, молярне співвідно- шення ізопропанол:лауринова кислота 10:1, склад каталіза- тора 33 % CuO, 33 % Ag2O і 33 % Al2O3, співвідношення каталізатор/лауринова кислота становить 8 мас %, час реакції 2 год. Показано, що оксиди каталізатора після естерифікації не перетворюються в інші речовини. This paper reports the synthesis of isopropyl laurate while using a mixture of metal oxides as a catalyst. The best conversion value was obtained in the following conditions: 393 K, isopropanol:lauric acid molar ratio is10:1, composition of the catalyst is 33 % CuO, 33%Ag2O and 33 % Al2O3, catalyst/lauric acid ratio is 8%(w/w), and reaction time 2 h. Isolation of the catalysts after esterification showed that the oxides were not converted into other materials.
URI:	https://ena.lpnu.ua/handle/ntb/45157
Copyright owner:	© Національний університет „Львівська політехніка“, 2018 © Krause F., Maruyama S., Wypych F., 2018
URL for reference material:	https://pubchem.ncbi.nlm.nih.gov/compound/25068 http://www.panoleo.com/esters.html http://www.sigmaaldrich.com/catalog/ https://doi.org/10.1016/j.saa.2016.07.006 https://doi.org/10.1016/j.catcom.2014.10.033 http://www.qca.ibilce.unesp.br/prevencao/produtos/acido_sulfurico.html https://pubchem.ncbi.nlm.nih.gov/compound/1118#section=Toxicity https://doi.org/10.1016/j.fuel.2016.05.078 https://doi.org/10.1016/j.catcom.2016.05.002 https://doi.org/10.1590/S0100-40422011000300021 https://doi.org/10.21577/0103-5053.20160251 https://doi.org/10.2475/ajs.s5-3.15.184 https://doi.org/10.1590/S1516-14392013005000044 https://doi.org/10.1016/j.powtec.2010.03.036 https://doi.org/10.2147/IJN.S29020 https://doi.org/10.1021/jp051577b https://doi.org/10.1016/j.biombioe.2010.10.035 https://doi.org/10.1016/j.apcata.2008.10.053 https://doi.org/10.1016/j.biortech.2015.06.079 https://doi.org/10.1016/j.fuel.2015.03.021
References (Ukraine):	[1] https://pubchem.ncbi.nlm.nih.gov/compound/25068 [2] http://www.panoleo.com/esters.html [3] http://www.sigmaaldrich.com/catalog/ [4] Oliveira A., Sá A., Pimentel M.. et al.: Spectrochim. Acta A,2017, 170, 56. https://doi.org/10.1016/j.saa.2016.07.006 [5] KuzminskaM., Backov R., Gaigneaux E.: Catal. Commun.,2015, 59, 222. https://doi.org/10.1016/j.catcom.2014.10.033 [6] http://www.qca.ibilce.unesp.br/prevencao/produtos/acido_sulfurico.html [7] https://pubchem.ncbi.nlm.nih.gov/compound/1118#section=Toxicity [8] Piker A., Tabah B., Perkas N. et al.: Fuel, 2016, 182, 34.https://doi.org/10.1016/j.fuel.2016.05.078 [9] Sun J., Yang J., Li S. et al.: Catal. Commun., 2016, 83, 35.https://doi.org/10.1016/j.catcom.2016.05.002 [10] Cordeiro C., Silva R., Wypych F. et al.: Quim. Nova, 2011, 34,477. https://doi.org/10.1590/S0100-40422011000300021 [11]Maruyama S., Kanda L., Wypych F.: J. Braz. Chem. Soc.,2017, 28, 985. https://doi.org/10.21577/0103-5053.20160251 [12]Wyckoff R.: Am. J. Sci., 1922, 5, 184.https://doi.org/10.2475/ajs.s5-3.15.184 [13] Yong N., Ahmad A., Mohammad A.: Int. J. Sci. Eng. Res.,2013, 4, 155. [14] Isernia L.:Mater. Res., 2013, 16, 792.https://doi.org/10.1590/S1516-14392013005000044 [15] Dubal D., Dhawale D., Salunkhe R. et al.: J. Alloys Compd.,2010, 492, 26. https:// doi.org/10.1016/j.jallcom.2009.11.149 [16] Boumaza A., Djelloul A., Guerrab F.: Powder Technol., 2010, 201, 177. https://doi.org/10.1016/j.powtec.2010.03.036 [17] SangappaM., Thiagarajan P.: Indian J. Pharm. Sci., 2015, 77, 151. [18] Azam A., Ahmed A., Oves M. et al.: Int. J. Nanomed., 2012, 7, 3527. https://doi.org/10.2147/IJN.S29020 [19] Raul P., Senapati S., Sahoo A. et al.: RSC Adv., 2014, 4, 40580. https:// doi.org/10.1039/c4ra04619f [20] Xu Y., Chen D., Jiao X.: J. Phys. Chem. B, 2005, 109, 13561. https://doi.org/10.1021/jp051577b [21]Moya-León A., Viales-Montero C., Arias-Carrillo M. et al.: Cienc. Tecnol. (San Jose, Costa Rica), 2006, 24, 175. [22] Voll F., da Silva C., Rossi C. et al.: Biomass Bioenerg., 2011,35, 781. https://doi.org/10.1016/j.biombioe.2010.10.035 [23] Yan S., Salley S., Ng K.: Appl. Catal. A, 2009, 353, 203.https://doi.org/10.1016/j.apcata.2008.10.053 [24] Paiva E., CorazzaM., Sierakowski M. et al.: Biores. Technol.,2015, 193, 337. https://doi.org/10.1016/j.biortech.2015.06.079 [25] Paiva E., Sterchele S., CorazzaM. et al.: Fuel, 2015, 153, 445.https://doi.org/10.1016/j.fuel.2015.03.021 [26] Lisboa F., Gardolinski J., Cordeiro C. et al.: J. Braz. Chem. Soc., 2012, 23, 46. https:// doi.org/10.1590/S0103-50532012000100008
References (International):	[1] https://pubchem.ncbi.nlm.nih.gov/compound/25068 [2] http://www.panoleo.com/esters.html [3] http://www.sigmaaldrich.com/catalog/ [4] Oliveira A., Sá A., Pimentel M.. et al., Spectrochim. Acta A,2017, 170, 56. https://doi.org/10.1016/j.saa.2016.07.006 [5] KuzminskaM., Backov R., Gaigneaux E., Catal. Commun.,2015, 59, 222. https://doi.org/10.1016/j.catcom.2014.10.033 [6] http://www.qca.ibilce.unesp.br/prevencao/produtos/acido_sulfurico.html [7] https://pubchem.ncbi.nlm.nih.gov/compound/1118#section=Toxicity [8] Piker A., Tabah B., Perkas N. et al., Fuel, 2016, 182, 34.https://doi.org/10.1016/j.fuel.2016.05.078 [9] Sun J., Yang J., Li S. et al., Catal. Commun., 2016, 83, 35.https://doi.org/10.1016/j.catcom.2016.05.002 [10] Cordeiro C., Silva R., Wypych F. et al., Quim. Nova, 2011, 34,477. https://doi.org/10.1590/S0100-40422011000300021 [11]Maruyama S., Kanda L., Wypych F., J. Braz. Chem. Soc.,2017, 28, 985. https://doi.org/10.21577/0103-5053.20160251 [12]Wyckoff R., Am. J. Sci., 1922, 5, 184.https://doi.org/10.2475/ajs.s5-3.15.184 [13] Yong N., Ahmad A., Mohammad A., Int. J. Sci. Eng. Res.,2013, 4, 155. [14] Isernia L.:Mater. Res., 2013, 16, 792.https://doi.org/10.1590/S1516-14392013005000044 [15] Dubal D., Dhawale D., Salunkhe R. et al., J. Alloys Compd.,2010, 492, 26. https:// doi.org/10.1016/j.jallcom.2009.11.149 [16] Boumaza A., Djelloul A., Guerrab F., Powder Technol., 2010, 201, 177. https://doi.org/10.1016/j.powtec.2010.03.036 [17] SangappaM., Thiagarajan P., Indian J. Pharm. Sci., 2015, 77, 151. [18] Azam A., Ahmed A., Oves M. et al., Int. J. Nanomed., 2012, 7, 3527. https://doi.org/10.2147/IJN.S29020 [19] Raul P., Senapati S., Sahoo A. et al., RSC Adv., 2014, 4, 40580. https:// doi.org/10.1039/P.4ra04619f [20] Xu Y., Chen D., Jiao X., J. Phys. Chem. B, 2005, 109, 13561. https://doi.org/10.1021/jp051577b [21]Moya-León A., Viales-Montero C., Arias-Carrillo M. et al., Cienc. Tecnol. (San Jose, Costa Rica), 2006, 24, 175. [22] Voll F., da Silva C., Rossi C. et al., Biomass Bioenerg., 2011,35, 781. https://doi.org/10.1016/j.biombioe.2010.10.035 [23] Yan S., Salley S., Ng K., Appl. Catal. A, 2009, 353, 203.https://doi.org/10.1016/j.apcata.2008.10.053 [24] Paiva E., CorazzaM., Sierakowski M. et al., Biores. Technol.,2015, 193, 337. https://doi.org/10.1016/j.biortech.2015.06.079 [25] Paiva E., Sterchele S., CorazzaM. et al., Fuel, 2015, 153, 445.https://doi.org/10.1016/j.fuel.2015.03.021 [26] Lisboa F., Gardolinski J., Cordeiro C. et al., J. Braz. Chem. Soc., 2012, 23, 46. https:// doi.org/10.1590/S0103-50532012000100008
Content type:	Article
Appears in Collections:	Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 2

Files in This Item:

File	Description	Size	Format
2018v12n2_Krause_F-A_preliminary_investigation_158-166.pdf		510.18 kB	Adobe PDF	View/Open
2018v12n2_Krause_F-A_preliminary_investigation_158-166__COVER.png		536.63 kB	image/png	View/Open

Show full item record

putin IS MURDERER