Skip navigation
DSpace logo
  1. Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"
  2. Електронний архів Науково-технічної бібліотеки
  3. Вісники та науково-технічні збірники, журнали
  4. Chemistry & Chemical Technology
  5. Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 1

putin IS MURDERER

Please use this identifier to cite or link to this item: https://oldena.lpnu.ua/handle/ntb/43918
Title: Rheological behavior of drilling fluids containing hydrophobically modified starch for filtrate reduction
Other Titles: Реологічне поведінка бурових розчинів з гідрофобно-модифікованим крохмалем для зменшення фільтрату
Authors: Dias, Fernanda
Souza, Roberta
Lucas, Elizabete
Affiliation: Universidade Federal do Rio de Janeiro (UFRJ), Instituto de Macromoléculas (IMA), Laboratório de Macromoléculas e Colóides na Indústria do Petróleo (LMCP)
Bibliographic description (Ukraine): Dias F. Rheological behavior of drilling fluids containing hydrophobically modified starch for filtrate reduction / Fernanda Dias, Roberta Souza, Elizabete Lucas // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2-18. — Vol 12. — No 1. — P. 86–92.
Bibliographic description (International): Dias F. Rheological behavior of drilling fluids containing hydrophobically modified starch for filtrate reduction / Fernanda Dias, Roberta Souza, Elizabete Lucas // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2-18. — Vol 12. — No 1. — P. 86–92.
Is part of: Chemistry & Chemical Technology, 1 (12), 2-18
Issue: 1
Volume: 12
Issue Date: 20-Jan-2018
Publisher: Lviv Politechnic Publishing House
Place of the edition/event: Lviv
Keywords: естери жирних кислот крохмалю
бурова рідина
інверсна емульсія (В/О)
реологічні моделі
fatty acid starch esters
drilling fluid
inverse emulsion (W/O)
rheological models
Number of pages: 7
Page range: 86-92
Start page: 86
End page: 92
Abstract: Для інверсних емульсій, що містять гідро- фобно-модифікований крохмаль, побудовано діаграми напруги- деформацій з використанням коаксіального циліндрового віскозиметра, та застосовано реологічні моделі. Встановлено, що модель Бінгама найбільш відповідає отриманим результатам. Кореляції, отримані за цією моделлю, дають можливість розрахувати величини пластичної в'язкості за межами діапазону чутливості віскозиметра і полегшують визначення умов для використання рідини.
In this work, stress-strain graphs of inverse emulsion fluids containing hydrophobically modified starch were plotted from measurements obtained with a coaxial rotating cylinder viscometer, and rheological models were applied. The Bingham model best fitted the experimental results. The correlations obtained by this model allowed calculating plastic viscosity values outside the shear rate sensitivity range of the viscometer and enabled better determination of the conditions for the fluid use.
URI: https://ena.lpnu.ua/handle/ntb/43918
Copyright owner: © Національний університет „Львівська політехніка“, 2018
© Dias F., Souza R., Lucas E., 2018
URL for reference material: https://doi.org/10.1002/0471440264.pst641
https://doi.org/10.1002/masy.201500131
https://doi.org/10.1002/masy.200651336
https://doi.org/10.1002/pen.21078
https://doi.org/10.1615/JPorMedia.v13.i5.20
https://doi.org/10.5772/10393
https://doi.org/10.1016/j.petrol.2004.03.008
https://doi.org/10.1016/j.clay.2014.12.029
https://doi.org/10.1016/S0141-3910(97)00168-7
https://doi.org/10.1016/j.petrol.2005.06.013
https://doi.org/10.1016/S0926-6690(99)00033-3
https://doi.org/10.1016/j.jchromb.2006.06.032
https://doi.org/10.1007/s00449-007-0112-5
https://doi.org/10.1016/0920-4105(95)00051-8
https://doi.org/10.2118/153705-MS
https://doi.org/10.1016/S1359-4311(00)00003-X
https://doi.org/10.1016/j.fuel.2014.09.074
https://doi.org/10.2118/66285-MS
http://dx.doi.org/10.2118/153709-PA
https://doi.org/10.1016/j.petrol.2009.04.001
https://doi.org/10.1080/00908310600713966
https://doi.org/10.2118/86197-MS
https://doi.org/10.1590/S1517-70762008000100026
https://doi.org/10.1590/S0366-69132005000200010
https://doi.org/10.2118/13458-MS
https://doi.org/10.2118/13001-PA
References (Ukraine): [1] Thomas J.: Fundamentos da Engenharia de Petróleo, Interciência, Rio de Janeiro 2001.
[2] Lucas E., Ferreira L., Khalil C.: Polymers Applications in Petroleum Production [in:] Mark H. (Ed.), Encyclopedia of Polymer Science and Technology. John Wiley & Sons, Inc. 2015.https://doi.org/10.1002/0471440264.pst641
[3] Santana K., Fagundes F., Carvalho L. et al.:Macromol. Symp.,2016, 367, 151. https://doi.org/10.1002/masy.201500131
[4] FigueiredoM., Almeida L., Costa F. et al.:Macromol. Symp.,2006, 1, 260. https://doi.org/10.1002/masy.200651336
[5] Spinelli L., Aquino A., Lucas E., et al.: Polym. Eng. Sci., 2008,48, 1885. https://doi.org/10.1002/pen.21078
[6]Martins A., Waldmann A., Massarani G.: J. PorousMedia, 2010,13, 1255. https://doi.org/10.1615/JPorMedia.v13.i5.20
[7] KhodjaM., Khodja-Saber M., Canselier J. et al.: Drilling Fluid Technology: Performances and Environmental Considerations, [in:] Fuerstner I. (Ed.), Products and Services; from R&D to Final Solutions. Sciyo Publisher 2010, 227. https://doi.org/10.5772/10393
[8]Mahto V., Sharma V.: J. Petrol. Sci. Eng., 2004, 45, 123.https://doi.org/10.1016/j.petrol.2004.03.008
[9] Caenn R., Darley H., Gray G.: Composition and Properties of Drilling and Completion Fluids, 6th edn. Gulf Professional Publishing, Houston 2011.
[10] Balaban R., Vidal E., BorgesM.: Appl. Clay Sci., 2015,105-106, 124. https://doi.org/10.1016/j.clay.2014.12.029
[11] Lörcks J.: Polym. Degrad. Stabil., 1998, 59, 245.https://doi.org/10.1016/S0141-3910(97)00168-7
[12] AmanullahM., Yu L.: J. Petrol. Sci. Eng., 2005, 48, 199.https://doi.org/10.1016/j.petrol.2005.06.013
[13]Miladinov V., HannaM.: Ind. Crop. Prod., 2000, 11, 51.https://doi.org/10.1016/S0926-6690(99)00033-3
[14] Fuda E., Jauregi P.: J. Chromatogr. B, 2006, 843, 317.https://doi.org/10.1016/j.jchromb.2006.06.032
[15] Simi C., Abraham T.: Bioprocess Biosystem. Eng., 2007, 30,173. https://doi.org/10.1007/s00449-007-0112-5
[16] DarleyH., GrayG.: Composition and Properties of Drilling and Completion Fluids, 5th edn. Gulf PublishingCompany, Houston 1988.
[17] Caenn R., Chillingar G. V.: J. Petrol. Sci. Eng., 1996, 14, 221.https://doi.org/10.1016/0920-4105(95)00051-8
[18]Wagle V., Maghrabi S., Teke K., Gantepla A.: SPE Oil and Gas India Conference and Exhibition. India, Mumbai, 28-30March2012. https://doi.org/10.2118/153705-MS
[19]Machado J.: Reologia e escoamento de fluidos, Rio de Janeiro, Interciência, 2002.
[20] Santoyo E., Santoyo-Gutiérrez S., Garcia A. et al.: Appl. Therm. Eng., 2001, 21, 283. https://doi.org/10.1016/S1359-4311(00)00003-X
[21] Dias F., Souza R., Lucas E.: Chem. Chem. Technol., 2013, 7, 451.
[22] Dias F., Souza R., Lucas E.: Fuels, 2015, 140, 711.https://doi.org/10.1016/j.fuel.2014.09.074
[23]Maglione, R., Robotti, G., Romagnoli R.: SPE J., 2000, 5, 377.https://doi.org/10.2118/66285-MS.
[24] De Stefano G., Stamatakis E., Young S.: SPE Drill Comp., 2013, 28, 86. SPE-153709-PA. http://dx.doi.org/10.2118/153709-PA.
[25] Hamed S., Belhadri M.: J. Petrol. Sci. Eng., 2009, 67, 84.https://doi.org/10.1016/j.petrol.2009.04.001
[26] Stefan P.: Cerâmica, 1996, 12, 266.
[27] Iscan A., KokM.: Energ. Source. A, 2007, 29, 939.https://doi.org/10.1080/00908310600713966
[28] Herzhaft B., Rousseau L., Neau L. et al.: SPE J., 2003, 8, 211, SPE-86197-MS. https://doi.org/10.2118/86197-MS.
[29] Shah S., Shanker N., Ogugbue C.: Future Challenges of Drilling Fluids and Their Rheological Measurements [in:] American Association of Drilling Engineers (AADE) Fluids Conference and Exhibition. USA, Houston, 6-7 April 2010, AADE-10-DF-HO-41.
[30] Amorim L., BarbosaM., Ferreira H.: RevistaMatéria, 2008,13, 209. https://doi.org/10.1590/S1517-70762008000100026
[31] Amorim L., Farias K., Viana J. et al.: Cerâmica, 2005, 51, 128.https://doi.org/10.1590/S0366-69132005000200010
[32] PolitteM.: SPE/IADC Drilling Conference. Louisiana, New Orleans, 5-8March 1985, SPE 13458.https://doi.org/10.2118/13458-MS
[33] Bailey T., Bern P., McEwan F.: SPE J., 1986, 1, SPE 13001-PA. https://doi.org/10.2118/13001-PA
[34] Gonçalves R.: Thesis for MSc degree, Universidade Federal Rural do Rio de Janeiro, Seropédica, Rio de Janeiro 2008.
References (International): [1] Thomas J., Fundamentos da Engenharia de Petróleo, Interciência, Rio de Janeiro 2001.
[2] Lucas E., Ferreira L., Khalil C., Polymers Applications in Petroleum Production [in:] Mark H. (Ed.), Encyclopedia of Polymer Science and Technology. John Wiley & Sons, Inc. 2015.https://doi.org/10.1002/0471440264.pst641
[3] Santana K., Fagundes F., Carvalho L. et al.:Macromol. Symp.,2016, 367, 151. https://doi.org/10.1002/masy.201500131
[4] FigueiredoM., Almeida L., Costa F. et al.:Macromol. Symp.,2006, 1, 260. https://doi.org/10.1002/masy.200651336
[5] Spinelli L., Aquino A., Lucas E., et al., Polym. Eng. Sci., 2008,48, 1885. https://doi.org/10.1002/pen.21078
[6]Martins A., Waldmann A., Massarani G., J. PorousMedia, 2010,13, 1255. https://doi.org/10.1615/JPorMedia.v13.i5.20
[7] KhodjaM., Khodja-Saber M., Canselier J. et al., Drilling Fluid Technology: Performances and Environmental Considerations, [in:] Fuerstner I. (Ed.), Products and Services; from R&D to Final Solutions. Sciyo Publisher 2010, 227. https://doi.org/10.5772/10393
[8]Mahto V., Sharma V., J. Petrol. Sci. Eng., 2004, 45, 123.https://doi.org/10.1016/j.petrol.2004.03.008
[9] Caenn R., Darley H., Gray G., Composition and Properties of Drilling and Completion Fluids, 6th edn. Gulf Professional Publishing, Houston 2011.
[10] Balaban R., Vidal E., BorgesM., Appl. Clay Sci., 2015,105-106, 124. https://doi.org/10.1016/j.clay.2014.12.029
[11] Lörcks J., Polym. Degrad. Stabil., 1998, 59, 245.https://doi.org/10.1016/S0141-3910(97)00168-7
[12] AmanullahM., Yu L., J. Petrol. Sci. Eng., 2005, 48, 199.https://doi.org/10.1016/j.petrol.2005.06.013
[13]Miladinov V., HannaM., Ind. Crop. Prod., 2000, 11, 51.https://doi.org/10.1016/S0926-6690(99)00033-3
[14] Fuda E., Jauregi P., J. Chromatogr. B, 2006, 843, 317.https://doi.org/10.1016/j.jchromb.2006.06.032
[15] Simi C., Abraham T., Bioprocess Biosystem. Eng., 2007, 30,173. https://doi.org/10.1007/s00449-007-0112-5
[16] DarleyH., GrayG., Composition and Properties of Drilling and Completion Fluids, 5th edn. Gulf PublishingCompany, Houston 1988.
[17] Caenn R., Chillingar G. V., J. Petrol. Sci. Eng., 1996, 14, 221.https://doi.org/10.1016/0920-4105(95)00051-8
[18]Wagle V., Maghrabi S., Teke K., Gantepla A., SPE Oil and Gas India Conference and Exhibition. India, Mumbai, 28-30March2012. https://doi.org/10.2118/153705-MS
[19]Machado J., Reologia e escoamento de fluidos, Rio de Janeiro, Interciência, 2002.
[20] Santoyo E., Santoyo-Gutiérrez S., Garcia A. et al., Appl. Therm. Eng., 2001, 21, 283. https://doi.org/10.1016/S1359-4311(00)00003-X
[21] Dias F., Souza R., Lucas E., Chem. Chem. Technol., 2013, 7, 451.
[22] Dias F., Souza R., Lucas E., Fuels, 2015, 140, 711.https://doi.org/10.1016/j.fuel.2014.09.074
[23]Maglione, R., Robotti, G., Romagnoli R., SPE J., 2000, 5, 377.https://doi.org/10.2118/66285-MS.
[24] De Stefano G., Stamatakis E., Young S., SPE Drill Comp., 2013, 28, 86. SPE-153709-PA. http://dx.doi.org/10.2118/153709-PA.
[25] Hamed S., Belhadri M., J. Petrol. Sci. Eng., 2009, 67, 84.https://doi.org/10.1016/j.petrol.2009.04.001
[26] Stefan P., Cerâmica, 1996, 12, 266.
[27] Iscan A., KokM., Energ. Source. A, 2007, 29, 939.https://doi.org/10.1080/00908310600713966
[28] Herzhaft B., Rousseau L., Neau L. et al., SPE J., 2003, 8, 211, SPE-86197-MS. https://doi.org/10.2118/86197-MS.
[29] Shah S., Shanker N., Ogugbue C., Future Challenges of Drilling Fluids and Their Rheological Measurements [in:] American Association of Drilling Engineers (AADE) Fluids Conference and Exhibition. USA, Houston, 6-7 April 2010, AADE-10-DF-HO-41.
[30] Amorim L., BarbosaM., Ferreira H., RevistaMatéria, 2008,13, 209. https://doi.org/10.1590/S1517-70762008000100026
[31] Amorim L., Farias K., Viana J. et al., Cerâmica, 2005, 51, 128.https://doi.org/10.1590/S0366-69132005000200010
[32] PolitteM., SPE/IADC Drilling Conference. Louisiana, New Orleans, 5-8March 1985, SPE 13458.https://doi.org/10.2118/13458-MS
[33] Bailey T., Bern P., McEwan F., SPE J., 1986, 1, SPE 13001-PA. https://doi.org/10.2118/13001-PA
[34] Gonçalves R., Thesis for MSc degree, Universidade Federal Rural do Rio de Janeiro, Seropédica, Rio de Janeiro 2008.
Content type: Article
Appears in Collections:Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 1

Files in This Item:
File Description SizeFormat 
2-18v12n1_Dias_F-Rheological_behavior_of_drilling_86-92.pdf353.89 kBAdobe PDFView/Open
2-18v12n1_Dias_F-Rheological_behavior_of_drilling_86-92__COVER.png511.4 kBimage/pngView/Open
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.