Skip navigation

putin IS MURDERER

Please use this identifier to cite or link to this item: https://oldena.lpnu.ua/handle/ntb/43917
Title: Polymer-FLR for mud fluid loss reduction
Other Titles: Полімер-FLR для зниженнявтрат напору бурового розчину
Authors: Nagre, Robert Dery
Zhao, Lin
Frimpong, Isaac Kwesi
Affiliation: Kumasi Technical University
College of Petroleum Engineering, Yangtze University
Bibliographic description (Ukraine): Nagre R. D. Polymer-FLR for mud fluid loss reduction / Robert Dery Nagre, Lin Zhao, Isaac Kwesi Frimpong // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2-18. — Vol 12. — No 1. — P. 79–85.
Bibliographic description (International): Nagre R. D. Polymer-FLR for mud fluid loss reduction / Robert Dery Nagre, Lin Zhao, Isaac Kwesi Frimpong // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2-18. — Vol 12. — No 1. — P. 79–85.
Is part of: Chemistry & Chemical Technology, 1 (12), 2-18
Issue: 1
Volume: 12
Issue Date: 20-Jan-2018
Publisher: Lviv Politechnic Publishing House
Place of the edition/event: Lviv
Keywords: синтез
полімер-FLR
розчин для буріння
втрата напору рідини
властивості бурового розчину
synthesis
polymer-FLR
drilling mud
fluid loss
mud properties
Number of pages: 7
Page range: 79-85
Start page: 79
End page: 85
Abstract: З використанням акриламіду, гідроксиетил- метакрилату, N-вінілпіролідону та N,N-диметил акриламіду внаслідок полімеризації вільних радикалів з наступним частковим гідролізом синтезовано полімер для зниження втрат напору рідини (полімер-FLR). Склад синтезованого полімеру підтверд- жено з використанням Фур’є- та 1H ЯМР-спектроскопії. Вста- новлено, що втрати бурового розчину з використанням полімер- FLR приблизно в 10 разів менші, ніж без нього, а зниження втрат при високому тиску і високій температурі – в 9 разів.
A fluid loss reducer polymer (polymer-FLR) was synthesized using acrylamide, hydroxyethyl methacrylate, N-vinyl pyrrolidone, and N,N-dimethyl acrylamide by free radical polymerization, followed by partial hydrolysis. Its composition was confirmed using FTIR and 1H NMR spectroscopy. API mud fluid loss reduction of polymer- FLR was about 10-fold lower than the blank. High temperature, high pressure fluid loss reduction of about 9-fold were achieved compared with the blank.
URI: https://ena.lpnu.ua/handle/ntb/43917
Copyright owner: © Національний університет „Львівська політехніка“, 2018
© Nagre R., Zhao L., Frimpong I., 2018
URL for reference material: https://doi.org/10.3968/pdf
https://doi.org/10.5539/esr.v2n1p175
https://doi.org/10.22078/jpst.2012.75
https://doi.org/10.9734/BJAST/2011/407
https://doi.org/10.4172/2157-7463.1000157
https://doi.org/10.2118/168289-MS
https://doi.org/10.1155/2013/824785
https://doi.org/10.2118/20213-MS
https://doi.org/10.1351/PAC-CON-08-07-21
https://doi.org/10.2118/13455-PA
https://doi.org/10.1515/chempap-2015-0184
https://doi.org/10.1155/2014/201301
https://doi.org/10.1002/(SICI)1097-4628(20000103)75:1<107::AIDAPP12>3.0.CO;2-P
http://www.ije.ir/Vol20/No3/B/8.pdf
References (Ukraine): [1] Ibeh C.:Master’s Thesis. Texas A&MUniversity, College Station,Texas 2007.
[2] Amani M., Al-Jubouri M.: Energ. Sci. Technol., 2012, 4, 27.https://doi.org/10.3968/pdf
[3] Hassiba K., Amani M. Earth Sci. Res., 2013, 2, 175.https://doi.org/10.5539/esr.v2n1p175
[4] Nasiri A., ValizadehM., Norouzi H., HemmatiM.: J. Petrol. Sci. Technol., 2012, 2, 37. https://doi.org/10.22078/jpst.2012.75
[5] Apugo-Nwosu T.,Mohammed-Dabo I., Ahmed A. et al.: Brit. J. Appl. Sci. Technol., 2011, 1, 152.https://doi.org/10.9734/BJAST/2011/407
[6] Nyland T., Azar J., Becker T., Lummus J.: SPE Drill. Eng., 1988,3,195. SPE-14703-PA
[7] Blkoor S., Fattah K.: J. Petrol. Environ. Biotechnol., 2013, 4, 157.https://doi.org/10.4172/2157-7463.1000157
[8] Shah S., Asafa K.: SPE/ICoTA Coiled Tubing andWell Intervention Conference and Exhibition, March 2014. https://doi.org/10.2118/168289-MS
[9] Lai N., Qin X., Ye Z. et al.: J. Chem., 2013, 1.https://doi.org/10.1155/2013/824785
[10] Karmakar G., ChakrabortyC.: Indian J. Chem. Technol., 2006,13, 162.
[11] RashidiM.: PhD Thesis. University of Bergen, Norway 2010.
[12] Jousset F., Green D.,Willhite G.,McCool C.: SPE/DOE Enhanced Oil Recovery Symposium, Tulsa, Oklakhoma 1990, 389.https://doi.org/10.2118/20213-MS
[13] Lucas E., Mansur C., Spinelli L., Queirós Y. : Pure Appl. Chem.,2009, 81, 473. https://doi.org/10.1351/PAC-CON-08-07-21, IUPAC.
[14] Perricone C., Enright D., Lucas J.: SPE Drill. Eng., 1986, 1, 358.https://doi.org/10.2118/13455-PA
[15] Nagre R., Zhao L., Frimpong I., Zhao Q-M.: Chem. Pap., 2016,70, 206. https://doi.org/10.1515/chempap-2015-0184
[16] Quan H., Li H., Huang Z. et al.: Int. J. Polym. Sci., 2014.https://doi.org/10.1155/2014/201301
[17] Silverstein R.,Webster F., Kiemle D.: Spectrometric Identification of Organic Compounds. 7th edn.Wiley, New York 2005.
[18] American Petroleum Institute. Recommended practice standard procedure for laboratory testing drilling fluid. API recommended practice (8th edn).Washington 2008.
[19] Sharma R.:Adv. Appl. Sci. Res., 2012, 3, 3961. www.pelagiaresearchlibrary.com.
[20] Singh P., Sharma V.: J. Sci. Ind. Res., 1997, 56, 281.
[21] Gungor N.: J. Appl. Polym. Sci., 2000, 75, 107.https://doi.org/10.1002/(SICI)1097-4628(20000103)75:1<107::AIDAPP12>3.0.CO;2-P
[22] AlaskariM., Teymoori R.: IJE Transactions B, 2007, 20, 283.http://www.ije.ir/Vol20/No3/B/8.pdf
References (International): [1] Ibeh C.:Master’s Thesis. Texas A&MUniversity, College Station,Texas 2007.
[2] Amani M., Al-Jubouri M., Energ. Sci. Technol., 2012, 4, 27.https://doi.org/10.3968/pdf
[3] Hassiba K., Amani M. Earth Sci. Res., 2013, 2, 175.https://doi.org/10.5539/esr.v2n1p175
[4] Nasiri A., ValizadehM., Norouzi H., HemmatiM., J. Petrol. Sci. Technol., 2012, 2, 37. https://doi.org/10.22078/jpst.2012.75
[5] Apugo-Nwosu T.,Mohammed-Dabo I., Ahmed A. et al., Brit. J. Appl. Sci. Technol., 2011, 1, 152.https://doi.org/10.9734/BJAST/2011/407
[6] Nyland T., Azar J., Becker T., Lummus J., SPE Drill. Eng., 1988,3,195. SPE-14703-PA
[7] Blkoor S., Fattah K., J. Petrol. Environ. Biotechnol., 2013, 4, 157.https://doi.org/10.4172/2157-7463.1000157
[8] Shah S., Asafa K., SPE/ICoTA Coiled Tubing andWell Intervention Conference and Exhibition, March 2014. https://doi.org/10.2118/168289-MS
[9] Lai N., Qin X., Ye Z. et al., J. Chem., 2013, 1.https://doi.org/10.1155/2013/824785
[10] Karmakar G., ChakrabortyC., Indian J. Chem. Technol., 2006,13, 162.
[11] RashidiM., PhD Thesis. University of Bergen, Norway 2010.
[12] Jousset F., Green D.,Willhite G.,McCool C., SPE/DOE Enhanced Oil Recovery Symposium, Tulsa, Oklakhoma 1990, 389.https://doi.org/10.2118/20213-MS
[13] Lucas E., Mansur C., Spinelli L., Queirós Y. : Pure Appl. Chem.,2009, 81, 473. https://doi.org/10.1351/PAC-CON-08-07-21, IUPAC.
[14] Perricone C., Enright D., Lucas J., SPE Drill. Eng., 1986, 1, 358.https://doi.org/10.2118/13455-PA
[15] Nagre R., Zhao L., Frimpong I., Zhao Q-M., Chem. Pap., 2016,70, 206. https://doi.org/10.1515/chempap-2015-0184
[16] Quan H., Li H., Huang Z. et al., Int. J. Polym. Sci., 2014.https://doi.org/10.1155/2014/201301
[17] Silverstein R.,Webster F., Kiemle D., Spectrometric Identification of Organic Compounds. 7th edn.Wiley, New York 2005.
[18] American Petroleum Institute. Recommended practice standard procedure for laboratory testing drilling fluid. API recommended practice (8th edn).Washington 2008.
[19] Sharma R.:Adv. Appl. Sci. Res., 2012, 3, 3961. www.pelagiaresearchlibrary.com.
[20] Singh P., Sharma V., J. Sci. Ind. Res., 1997, 56, 281.
[21] Gungor N., J. Appl. Polym. Sci., 2000, 75, 107.https://doi.org/10.1002/(SICI)1097-4628(20000103)75:1<107::AIDAPP12>3.0.CO;2-P
[22] AlaskariM., Teymoori R., IJE Transactions B, 2007, 20, 283.http://www.ije.ir/Vol20/No3/B/8.pdf
Content type: Article
Appears in Collections:Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 1

Files in This Item:
File Description SizeFormat 
2-18v12n1_Nagre_R_D-Polymer_FLR_for_mud_fluid_79-85.pdf345.36 kBAdobe PDFView/Open
2-18v12n1_Nagre_R_D-Polymer_FLR_for_mud_fluid_79-85__COVER.png544.98 kBimage/pngView/Open
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.